Root and Install TWRP recovery on Galaxy J3

TWRP recovery is now available for the Samsung Galaxy J3 Android smartphone. This one is the official TWRP recovery, not the modified or unofficial. All credit goes to the TEAMWIN team to releasing the TWRP recovery for the Galaxy J3 Smartphone. Now with the help of this TWRP recovery, you can quickly flash the Super SU Zip file and rooted your phone. Here in this guide, i will show you how to TWRP recovery on Galaxy J3 and get the root access.

Note: Make sure you backup all important files on your phone before proceeding.

Install Galaxy J3 TWRP recovery and get Root

1. Download & save the Galaxy J3 TWRP recovery .tar file from here

2. Now Download Odin 3.10.7 here to flash the recovery file on your phone. Unzip the folder

3. Now Enable OEM unlock on Your phone. To do this go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.

Now back to the Settings page,> “Developer options”. Under Developer options, look for “Enable OEM unlock” checkbox/toggle and make sure you Check it or turn it ON.

4. Boot Galaxy J3 in download mode. To do this turn off your android. Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.

Now press the Volume Up on the warning screen to accept it and boot into Download mode.

5. Once your phone in download mode, use the USB cable to connect your phone to the PC.

6. Now run the ODIN.exe file that you downloaded above.

7. On the ODIN screen, you will see the “Added!!” message.

8. Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.

NOTE: on- Don’t select or check any other option in the ODIN screen.

9. Click the Start button in Odin and wait for it to finish the process.

10. Once the flashing process is done, you will see the pass message on the Odin screen.

Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.

11. Now to root the phone. Download SuperSU v2.78 (latest) here and save the zip file on your phone.

12. Boot your device into TWRP recovery. Switch off your Phone and hold “Home + Power + Volume Up” buttons for a few seconds and as soon as you see your device’ logo on-screen, release three buttons altogether. Your device will boot into TWRP recovery.

13. Tap on “Install” and select the SuperSU zip file and flash the same on your phone to get the root access.

14. Once SuperSU is flashed, you’ll get “Reboot System” option, select it.

That’s it! Now your phone is rooted, and TWRP recovery installed on Galaxy J3

Guide to Root Samsung Galaxy S4 I9500 & Custom Recovery Install

If you are the Samsung Galaxy S4 I9500 user and looking for a guide to Root your Device and install custom recovery on Samsung Galaxy S4 I9500. Then you are at the right place, today in this post we let you know how you can Root Samsung Galaxy S4 I9500 & Custom Recovery Install. There are lots of benefits of rooting the device such as install rooted apps on your device, take nandroid backup, customize your device as per your need. After rooting your device you can enjoy lots of custom ROM’s on your device and remove unwanted bloatware applications from your device.

Disclaimer: Follow this guide at your own risk.HowToRootMobile.com won’t be responsible in case your device gets damaged in any other way during the process.

Before doing anything follow the below mention steps on you device:-

a) Take the Full Backup of your device with these application

b) Enable USB debugging mode on your device, read the guide here how to enable USB debugging mode.

c) Download and install Samsung Drivers from here.

After this follow the below mention guide to root your Galaxy S4 and Install custom recovery. Remember this guide only for the Galaxy S4 I9500 (Exynos version) users and not the I9505 (qualcomm version). So make sure first that you have the Galaxy S4 I9500 (Exynos version). You can confirm this at the booting screen itself or via “Settings -> More -> About Device”.

How to Root Samsung Galaxy S4 I9500 & Install Custom Recovery

Step 1. Install the Samsung Drivers on your Windows PC and enable USB debugging on your device.

Step 2. Now Download the ODIN flash tool and download Adam Kernel to root your Samsung Galaxy S4.

Step 3. Now Download the ClockworkMod Recovery on your Windows desktop, this will help you to install Custom recovery on your rooted Samsung Galaxy S4.

Step 4. Now lets start the rooting process. Turn off your device so that it can be entered in the Download Mode. Once the device id off hold down Volume Down, Center Home, and Power buttons together for about 5 seconds. When you see the warning screen, let go of all buttons then hit the Volume Up button to enter ODIN Download mode.

Step 5. Now you are on the Download mode, now run the ODIN application on your desktop that your download on Step2 and connect your device with the computer via USB cable.

Step 6. Now in ODIN screen choose PDA, then browse the Adam Kernel file that you download on step 2 (choose the file “GT-I9500_AdamKernel.V1.2.Odin.tar”). Next, ensure that the check boxes “Auto Reboot”, “F. Reset Time” and “PDA” are the only check boxes checked and the rest are not.

Step 7. Now hit the Start button form the ODIN application screen and rooting process will start and it will take some time. After this the phone should reboot on its own. After the phone restarts, you should see the “Superuser” application installed on your device and the phone already rooted automatically by this kernel. That’s it now your Galaxy S4 is rooted and now its time to install custom recovery on the device.

Step 8. To install the Custom Recovery, turn off the devic eagain enter in Download mode as you done on Step4. Once your are on Download mode, connect your device again with PC and run the ODIN application and this time you have to flash ClockworkMod Recovery file “recovery-clockwork-6.0.3.2-i9500.tar.md5” with the help of ODIN (Same as Step 6).

Step 9. Hit the “Start” button and wait a few seconds till it gets done and the phone restarts automatically.

Congratulation now your Galaxy S4 is rooted and custom recovery is installed on your device.

How to Unroot the Samsung Galaxy Tab 4 10.1 (LTE)

I. Before You Begin

1. You should’ve rooted your device using the procedure given here.

2. This only works for the SM-T535 model of the device.

3. This should only work on Windows based PCs.

4. You should’ve appropriate drivers installed on your PC. If you haven’t, download and install the latest drivers from here.

II. Downloading Required Files

1. Download Odin and save it to your desktop.

Odin

2. Download the appropriate stock firmware for your device and save it to your desktop.

Stock Firmware

III. Unrooting the Samsung Galaxy Tab 4 10.1 (LTE)

1. Extract files from Odin as well as Stock Firmware to your desktop by right-clicking on each of them and selecting Extract here.

2. Double-click on Odin executable and it’ll open.

3. Click on PDA and choose the stock firmware file you just extracted to your desktop.

4. Uncheck Repartition if it’s already checked in the Odin.

5. Put a checkmark in the boxes that say Auto Reboot and F. Reset Time.

6. Turn OFF your device.

7. Turn it back on by holding down Volume DOWN, Home, and Power buttons together.

8. Press Volume UP and your device should be in Download mode.

9. Plug in your device to your PC using the USB cable.

10. Click on Start in the Odin and it’ll start flashing the stock firmware on your device.

11. When the firmware’s flashed, your device should automatically reboot.

12. And you’re all set!

Your Samsung Galaxy Tab 4 10.1 (LTE variant) is now running the official stock firmware and is now unrooted.

How to Root the Samsung Galaxy Camera 2

I. Before You Begin

1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.

2. This only works for the EK-GC200 model of the device.

3. This should only work on Windows based PCs.

4. You should’ve appropriate drivers installed on your PC. If you haven’t, you can download and install the latest drivers fromhere.

II. Downloading Required Files

1. Download Odin and save it to your desktop.

Odin

2. Download CF-Root and save it to your desktop.

CF-Root

III. Rooting the Samsung Galaxy Camera 2

1. Extract files from Odin and CF-Root to your desktop by right-clicking on each of them and selecting Extract here.

2. Double-click on Odin executable and it’ll launch.

3. Click on PDA and choose the CF-Root file that you just extracted to your desktop.

4. Make sure Repartition is unchecked in the Odin.

5. Checkmark the boxes that say Auto Reboot and F. Reset Time.

6. Turn OFF your device.

7. Turn it back on by holding down Volume DOWN, Home, and Power buttons together.

8. Press Volume UP and you should be in Download mode.

9. Plug in your device to your PC via USB cable.

10. Hit Start in the Odin and it’ll start flashing the root file on your device.

11. When the file’s flashed, your device should automatically reboot.

12. And you’re all set!

Congrats! Your Galaxy Camera 2 is now rooted. With root on your Android device, you can do a lot of things and the first thing we’d suggest you to do is install some root-only apps from the Google Play store. Go ahead and do it right now!

How to Root/Install CWM Custom Recovery the Samsung Galaxy Tab 3 Lite 7.0

 I.  Before You Begin

1. Rooting your device may void your warranty or damage your device. Proceed at your own risk.

2.  Charge your device to 75% or more and back up everything you feel is important before you start.

3.  Make sure you have the necessary drivers installed before you start.  Installing Samsung Kies usually takes care of this.

II.  Necessary Downloads

1.  Odin_v3.07.zip

2.  T110.CWM.v6.0.4.8.tar.md5 [Download link available in this post under the  CWM Recovery 6.0.4.8 section at the beginning of the post]

3.  android-armeabi-universal-root-signed.zip [File attached to this post]

III.  Installing Custom Recovery on the Galaxy Tab 3 Lite 7.0

1.  Enable USB debugging on your device by going to Settings > Developer options.  If you do not find Developer options on your device,  go to Settings > About phone and keep tapping on the build number until you see the message ‘You are now a developer.’

2.  Connect your device to your PC and copy android-armeabi-universal-root-signed.zip to your device’s SD card (internal or external); copy it to the main folder, not into any subfolders.

3.  Disconnect your device and power it down.

4.  Boot your device into Download mode.  To do this, press and hold the Volume Down + Home + Power buttons simultaneously for five seconds or so until you see the warning screen, then press the Volume Up button.

5.  Extract Odin_v3.07.zip to a folder on your desktop.

6.  From the extracted folder, double-click on Odin3 v3.07.exe to run the Odin tool.

7.  On Odin, uncheck the Auto Reboot tickbox and make sure that only F. Reset Time is ticked under the Option section.  This is important as ticking anything else here could end up bricking your device.

8.  Connect your device (now in Download mode) to your PC using a compatible microUSB cable.  The ID:COM field should now show the message ‘ADDED!’ which means your device is recognized and ready for flashing.  If not, reinstall drivers and try again.

9.  Click on the PDA button on Odin and navigate to the location of T110.CWM.v6.0.4.8.tar.md5, select it and then click Open to load it on to Odin.

10.  Click on Start to starting flashing the ClockworkMod Recovery file.

11.  Wait until you see the RES OK! message and then reboot your device directly into the custom recovery using the Volume Up + Home + Power buttons simultaneously; let go of the Power button when you see the Samsung logo but continue holding the Volume Up and Home buttons until you get into recovery.

You now have ClockworkMod Recovery installed on your device!

IV.  Rooting the Samsung Galaxy Tab 3 Lite 7.0

1.  Once in recovery, use the volume buttons to highlight ‘install zip from sdcard’ and use the home button to execute the option.

2.  Navigate to the location of the android-armeabi-universal-root-signed.zip file you copied to your SD card above and highlight and select it.

3.  Select Yes on the next screen.

4.  Once flashed, go back to the main menu and select ‘reboot system now.’

Your Samsung Galaxy Tab 3 Lite 7.0 is now rooted!

How to Root the Samsung Galaxy Note 10.1 (XXUDNE6)

How To Root Sprint Galaxy S3 After Android 4.4.2 Kitkat Update

Before You Begin:

• You need a Windows based PC or Laptop.
• You device must be updated to Android 4.4.2 kitkat.
• This method is working and tested on Sprint Galaxy S3 only.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Download Odin3 v3.07 flash tool  (Important For All)
• CF-Auto-Root zip file

How To Root Sprint Galaxy S3:

• Download both Odin & CF-Auto-Root zip files.
• Extract Odin flash tool on your desktop
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button at same time.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed). Click on PDA button in Odin and select the CF-Auto-Root tar file. Only check Auto Reboot & F.Reset  option, don’t tick any other option like given below.

• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.

Congrats!!! Your Sprint Galaxy S3 is rooted on Android 4.4.2 kitkat successfully.
Source

How To Update Sprint Galaxy S3 To Android 4.4.2 Kitkat

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Sprint Samsung Galaxy S3.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin V3.09 (V3.09 download link given in last of that page)
• Official Stock Firmware / Mirror

How To Update Android 4.4.2 Kitkat On Sprint Samsung Galaxy S3 :

1. Download both Odin & Firmware Package in your PC.
2. Extract both Odin & Firmware Package in your PC.
3. Now Turn off your device completely.
4. Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
5. Now launch the Odin .exe file and connect your device to PC with USB cable.
6. Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
7. Now select files as per below instructions to install Android 4.4.2.Kitkat on Sprint Samsung Galaxy S3.
8. If only one file is available in the Stock Firmware zip package of .tar.md5 extension. Then click on PDA button in Odin and select file that file. If there are other file also in zip file then select files according to given below, otherwise move to the next step:

• Click on Phone button in Odin and select file with "MODEM" in its name
• Click on CSC button in Odinand select file with "CSC" in its name
• Click on PIT button in Odin and select file with ".pit" in its name

1. Only check Auto Reboot & F.Reset  option, don’t tick any other option.
2. Now click on Start button in Odin to start the installation process.It take few minutes to finish.
3. You will see a PASS message in Odin message box after successful installation.
4. Your device reboot automatically.First boot can take few minutes.

Great!! Sprint Samsung Galaxy S3 is successfully updated to Android 4.4.2. kitkat. If you want to get Root Access back Click Here

Source

How To Root Samsung Galaxy Note 10.1 2014 Edition

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Samsung Galaxy Note 10.1  Android Tablet:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy Note 10.1 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy Note 10.1.

Before You Begin:

• Samsung Galaxy 10.1 (2014 Edition) 3G P601, WiFi P600, LTE P605 (Check it: On Settings>About Device)
• Windows-based computer or laptop
• Download Samsung Galaxy Note 10.1 USB driver for Windows and install in your computer.
• Skip this step if you have installed the Samsung Kies.
• Enable USB Debugging on your device.Follow This Guide
• Make sure your phone is charged to 60% 80% to avoid battery blackout and interruption during this tutorial.
• We recommend you make a backup on your data and media files before the tutorial.

Download Required Files:

• Note 10.1 2014 3G P601 Download Link | File name: CF-Auto-Root-lt033g-lt033gxx-smp601.zip (15.27 MB)
• Note 10.1 2014 WiFi P600 Download Link | File name: CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip (15.0 MB)
• Note 10.1 2014 LTE P605 Download Link | File name: CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip (19.44 MB)
• Odin Tool for Samsung

How To Root Samsung Galaxy Note 10.1:

• Download  CF AutoRoot zip file on your PC .
• Download Odin Flash Tool in your PC and extract on your desktop.
• Turn Off your Samsung Galaxy Note 10.1 and Boot your Galaxy NOTE 10.1 into Download Mode. To do this by pressing and keeping holding the Volume Down, Power and Home buttons simultaneous.
• After booting into Download Mode connect your device to PC with USB cable.
• Once the device is connected successfully, the ID: COM box of ODIN screen will turn blue with the COM port number.
• Click on the PDA button on Odin and select the CF-Auto-Root.zip file (Same file that you downloaded on the Step 1)
• Make sure Re-Partition option in Odin is not selected.
• Now click on Start button on Odin tool to start root process.
• The process will take few minute.
• Wait until you see PASS! message on Odin tool.
• Your device will reboot now automatically.
• Now you can disconnect your device from PC.

How to Root Verizon & AT&T Galaxy S4 on Android 4.3 Firmware

Image Credits

Kimu’s root exploit for the Verizon and AT&T Galaxy S4 is based on another exploit by Cubeuncube. The method is safe to use as its very name implies and works great on builds VRUEMJ7 and VRUEMK2 both.Though Saferoot method described below works fine on the Verizon S4 SCH-I545 and AT&T S4 SGH-I337, we cannot warrant that it is 100% safe. Follow the guide at your own risk.

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Samsung Galaxy S4 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy S4 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy S4.

Before You Begin:

• Samsung Galaxy S4 AT&T & Verizon(Check it: On Settings>About Device)
• Windows-based computer or laptop
• Download Samsung Galaxy S4 USB driver for Windows and install in your computer.
• Skip this step if you have installed the Samsung Kies.
• Enable USB Debugging on your device.Follow This Guide
• Make sure your phone is charged to 60% 80% to avoid battery blackout and interruption during this tutorial.
• We recommend you make a backup on your data and media files before the tutorial.

Download Required Files:

• SafeRoot.zip file: Download Link , Mirror 1 , Mirror 2

How To Root Samsung Galaxy S4 (AT&T & Verizon) on Android 4.3:

• Follow all step given above for safe rooting.
• Download & Extract Saferoot.zip file in your PC.
• Now connect your device to PC with USB cable (Make sure USB Debugging is enabled Follow This Guide).
• Now open the extract folder of Saferoot.zip file and double-click the install.bat file to run it.
• A command prompt window will launch. It will try to look for your device and when it is detected, the Saferoot script will run automatically and attempt to root your Verizon and AT&T Galaxy S4 on VRUEMJ7 or VRUEMK2 firmware.

• Wait for the completion of rooting process.
• When the SuperUser is installed to your phone, you device will reboot automatically.

How To Install (Update) Android 4.4 Kitkat In T-Mobile Samsung Galaxy S4

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your T-Mobile Samsung Galaxy S4 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your T-Mobile Samsung Galaxy S4 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your T-Mobile Samsung Galaxy S4.

Some Important Articles:

• How To Root T-Mobile Galaxy S4 M919 on Android 4.2.2 Jelly Bean [CF Auto Root]
• How To Install Clockworkmod Recovery on T-Mobile Galaxy S4 SGH-M919 (CWM)
• Top 5 Best Custom Roms For Samsung Galaxy S4 T-Mobile (SGH-M919)

Before You Begin:

• You need a Windows based PC or Laptop.
• This custom ROM is tested & working in T-Mobile Galaxy S4 only.
• Root & Install Custom Recovery in your T-Mobile Samsung Galaxy S4.(Links are given in Some Important Articles section above)
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your T-Mobile Samsung Galaxy S4.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• KangROM Android 4.4 For Galaxy S4

How To Update T-Mobile Samsung Galaxy S4:

• Follow all the instruction given above for safe installation.
• Now connect you device to PC with USB cable.
• Move or Copy both downloaded files on your external sdcard.
• Now switch off your device and boot into recovery mode.To do this, Press and Hold Volume Up + Home and Power buttons.
• Once you’re in Recovery Mode, Select wipe data/factory reset, followed by wipe cache and wipe dalvik cache from advanced.
• Now go back to the main menu of Recovery Mode and select “install zip from SD card”.
• Select and Install custom rom zip file and then GApps package.
• After successful installation, go back to main menu of Recovery Mode and select reboot system now.
• First boot can take upto 5 minutes.

How To Install (Update) Android 4.4 Kitkat In Samsung Galaxy S3 I9305 LTE

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Samsung Galaxy S3 LTE Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy S3 LTE after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy S3 LTE.

Some Important Articles:

• How To Root and Install Custom Recovery In Samsung Galaxy S3 (All Versions)
• 5 Best (Top) Custom Roms For Samsung Galaxy S3 I9300
• How To Update Samsung Galaxy S3 With Android 4.3 Jellybean
• How To Root Samsung Galaxy S3 I9300 On Android 4.3 Jellybean
• How To Install Android 4.4 Kitkat In Samsung Galaxy S3 I9300

Before You Begin:

• You need a Windows based PC or Laptop.
• Root & Install Custom Recovery in your Samsung Galaxy S3 LTE.(Links are given in Some Important Articles section above)
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3 LTE.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Android 4.4 Kitkat Custom ROM for Samsung Galaxy S3 LTE
• GApps Package For Samsung Galaxy S3

How To Update Samsung Galaxy S3:

• Follow all the instruction given above for safe installation.
• Now connect you device to PC with USB cable.
• Move or Copy both downloaded files on your external sdcard.
• Now switch off your device and boot into recovery mode.To do this, Press and Hold Volume Up + Home and Power buttons.
• Once you’re in Recovery Mode, Select wipe data/factory reset, followed by wipe cache and wipe dalvik cache from advanced.
• Now go back to the main menu of Recovery Mode and select “install zip from SD card”.
• Select and Install custom rom zip file and then GApps package.
• After successful installation, go back to main menu of Recovery Mode and select reboot system now.
• First boot can take upto 5 minutes.

How To Install (Update) Android 4.4 Kitkat In Samsung Galaxy S3 I9300

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Samsung Galaxy S3 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy S3 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy S3.

Some Important Articles:

• How To Root and Install Custom Recovery In Samsung Galaxy S3 (All Versions)
• 5 Best (Top) Custom Roms For Samsung Galaxy S3 I9300
• How To Update Samsung Galaxy S3 With Android 4.3 Jellybean
• How To Root Samsung Galaxy S3 I9300 On Android 4.3 Jellybean

Before You Begin:

• You need a Windows based PC or Laptop.
• Root & Install Custom Recovery in your Samsung Galaxy S3.(Links are given in Some Important Articles section above)
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Android 4.4 Kitkat Custom ROM for Samsung Galaxy S3
• GApps Package For Samsung Galaxy S3

How To Update Samsung Galaxy S3:

• Follow all the instruction given above for safe installation.
• Now connect you device to PC with USB cable.
• Move or Copy both downloaded files on your external sdcard.
• Now switch off your device and boot into recovery mode.To do this, Press and Hold Volume Up + Home and Power buttons.
• Once you're in Recovery Mode, Select wipe data/factory reset, followed by wipe cache and wipe dalvik cache from advanced.
• Now go back to the main menu of Recovery Mode and select “install zip from SD card”.
• Select and Install custom rom zip file and then GApps package.
• After successful installation, go back to main menu of Recovery Mode and select reboot system now.
• First boot can take upto 5 minutes.

How To Root Samsung Galaxy Win I8550

If you are searching for Rooting guide,then you are at right place. In this article,I will provide you step by step instruction about "How To Root Samsung Galaxy Win Easily".

Warnings:

Below are some warning statements that you must be knowing before preparing to root your Samsung Galaxy Win Android Smartphone:

• Rooting is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy Win after rooting it.
• There are certain risks of damaging your Android Smartphone while rooting it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the rooting process.
• You might not receive any future official software or firmware updates after rooting your Samsung Galaxy Win.

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working on Samsung Galaxy Win.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Root File

How To Root Samsung Galaxy Win I8550:

• Please follow all the steps given above for your device safety.
• Download the OneClickRoot in your PC.
• Connect your device to PC with USB cable (Make use USB Debugging is enabled).
• Now run the OneClickRoot in your PC.
• Wait for few seconds, Let him detect your device.
• After OneClickRoot detect your device, Click on Root Now button.
• Rooting process will begin now, wait for process to end.
• Your Samsung Galaxy Win will reboot now.

How To Install (Update) Android 4.4 Kitkat In Samsung Galaxy Note 2

If you want to update your device with the official Android 4.3 jellybean Click Here

Before You Begin:

• Your device must be rooted. Click Here for rooting method for Note 2.
• You must have custom recovery in Note 2.Click Here for installation method.
• Download & Install Samsung Galaxy Note 2 USB Drivers in your PC.
• Enable USB Debugging in you device.Click Here if you don't know how to enable.

Download Required Files:

• Android 4.4 Custom Rom
• GApps For Note 2

How To Install Android 4.4 In Samsung Galaxy Note 2:

• Please follow all the instructions given in Before You Begin section.
• Download both Custom Rom & GApps package in your PC.
• Now connect your device to PC and transfer Custom Rom & GApps package to external Sdcard of your device.
• Now turn off your device.
• Boot your device in Recovery Mode (Press & Hold Volume Up+Home Button+Power Button)..Install CWM recovery first.
• Now wipe your device.Select Wipe data/Factory Reset & Wipe Cache Partition from Recovery Menu.
• Now go to advanced section of recovery and Wipe Dalvik Cache.
• Return to the main menu of Recovery Mode and select install zip from sdcard and select the download custom rom from the external sdcard.
• After successful installation of Custom Rom.Select install zip from sdcard and select the GApps Package and install it in your device.
• After successful installation.go back to main menu of Recovery Mode.
• Select reboot system now option from recovery.Your device will reboot automatically.
• First boot can take 5 minutes.So, don't worry about that