Root and Install TWRP recovery on Galaxy J3

TWRP recovery is now available for the Samsung Galaxy J3 Android smartphone. This one is the official TWRP recovery, not the modified or unofficial. All credit goes to the TEAMWIN team to releasing the TWRP recovery for the Galaxy J3 Smartphone. Now with the help of this TWRP recovery, you can quickly flash the Super SU Zip file and rooted your phone. Here in this guide, i will show you how to TWRP recovery on Galaxy J3 and get the root access.

Note: Make sure you backup all important files on your phone before proceeding.

Install Galaxy J3 TWRP recovery and get Root

1. Download & save the Galaxy J3 TWRP recovery .tar file from here

2. Now Download Odin 3.10.7 here to flash the recovery file on your phone. Unzip the folder

3. Now Enable OEM unlock on Your phone. To do this go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.

Now back to the Settings page,> “Developer options”. Under Developer options, look for “Enable OEM unlock” checkbox/toggle and make sure you Check it or turn it ON.

4. Boot Galaxy J3 in download mode. To do this turn off your android. Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.

Now press the Volume Up on the warning screen to accept it and boot into Download mode.

5. Once your phone in download mode, use the USB cable to connect your phone to the PC.

6. Now run the ODIN.exe file that you downloaded above.

7. On the ODIN screen, you will see the “Added!!” message.

8. Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.

NOTE: on- Don’t select or check any other option in the ODIN screen.

9. Click the Start button in Odin and wait for it to finish the process.

10. Once the flashing process is done, you will see the pass message on the Odin screen.

Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.

11. Now to root the phone. Download SuperSU v2.78 (latest) here and save the zip file on your phone.

12. Boot your device into TWRP recovery. Switch off your Phone and hold “Home + Power + Volume Up” buttons for a few seconds and as soon as you see your device’ logo on-screen, release three buttons altogether. Your device will boot into TWRP recovery.

13. Tap on “Install” and select the SuperSU zip file and flash the same on your phone to get the root access.

14. Once SuperSU is flashed, you’ll get “Reboot System” option, select it.

That’s it! Now your phone is rooted, and TWRP recovery installed on Galaxy J3

Install Android 7.0 Nougat on OnePlus One

 WARNING!

Your warranty is void if you follow the given instruction in this guide. We the Howtorootmobile.com team or the developers are not responsible for bricked devices, dead SD cards. Read all the instruction very carefully and Perform everything at your own risk.

 CHECK PHONE MODEL

This guide is only for the OnePlus One android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.

Requirements to Apply

Before following the below Mention guide, It’s always recommended to follow our pre-requisites and requirement to stay safe.

1. BACKUP YOUR ANDROID DATA

Do take the Full Backup of your Android Apps, SMS, Contacts, Call Logs, Bookmarks. This one is one of the most important step that you have to follow, as we don’t want anyone losing their personal data or apps. For help on Backup and Restore check out the below mention guides.

 Free Android Apps to Backup

 Backup WhatsApp Messages

2. INSTALL USB DRIVERS

First you need to Setup ADB and Fastboot Drivers on windows PC. This will help you to send basic linux commands, and a variety Android specific commands from PC to connected Android devices.

 Setup ADB and Fastboot Drivers

Now you need to install the USB drivers to connect your device with the computer to follow this guide. Without these USB drivers you can’t connect your device to the PC, first download and install these drivers on your system.

 Download Android USB Drivers

3. ENABLE USB DEBUGGING MODE

Now you need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root, Custom ROM or Unlock process.

 How to Enable USB Debugging Mode

4. CHARGE YOUR ANDROID

If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.

After following the above mention steps follow the below mention guide one by one to proceed with the tutorial. All the above mention steps are very important, so do follow all the steps and do exactly what is told.

Download AOSP 7.0 Nougat ROM for OnePlus One

a) Download Android 7.0 AOSP ROM for OnePlus One

b) Android 7.0 Gapps For OnePlus One

Install Android 7.0 Nougat on OnePlus One

Step 1. Doanload the ROM and Gapps Zip file form above and place both the file sin your phone intenral memry.

Step 2. Now Boot your device into TWRP Recovery mode by press and hold “Volume Down+Power Button”

Step 3. Once you are in recovery mode. Now in TWRP, create a Nandroid backup (Recommended) of your device for safer side, if anything goes wrong.

Srep 4. Now fprm the main mewnu of TWRP go to Wipe > Advanced Wipe > Select Wipe cache, Dalvik cache, System, and data and swipe to confirm it.

Step 5. Now, Go to Install and locate the ROM zip file & swipe to Install the ROM file. After the process completes, Flash the GApps zip file.

Step 6. Now wipe cache & Dalvik cache again and Reboot your device.

Step 7. Done!

Now your phone is running on the Android 7.0.

One-Click ToolKit to Install TWRP on Redmi Note 3

 WARNING!

Your warranty is void if you follow the given instruction in this guide. We the Howtorootmobile.com team or the developers are not responsible for bricked devices, dead SD cards. Read all the instruction very carefully and Perform everything at your risk.

 CHECK PHONE MODEL

This guide is only for the Redmi Note 3 Android smartphone. Don’t try this method on any of other Android devices; It may hard brick your device. So, first, confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.

Requirements to Apply

a) Bootloader Unlocked

b) FLASHER TOOLKIT Redmi Note 3

c) Minimal ADB and Fastboot

Use One-Click ToolKit to Install TWRP on Redmi Note 3

Step 1. Download “Minimal ADB and Fastboot” and install from the above mention link.

Step 2. After doing this connect your phone to the PC with USB cable.

Step 3. Now unzip the FLASHER TOOLKIT and run the “FLASHER TOOLKIT LANDv1.bat” in Administrator mode.

Step 4. Next, you will see the menu for what you want to do, as mentioned on the highlight, choose Menu #1 to flash TWRP 3.0 and follow the on-screen instructions.

Step 5. Once the flashing is done successfully, Reboot your phone. Now you can also Root Your phone by installing the Super SU zip file from the TWRP recovery.

Use Flasher ToolKit To Root Redmi 3S/Prime/3X & Install TWRP

Flasher ToolKit is now available for the Redmi 3S/Prime/3X. With this tool, you can easily Root and Install TWRP on Redmi 3S/Prime/3X phones. Now no need to run any command on your Windows PC to Install TWRP or root your Redmi 3S. Just install this new Flasher ToolKit on your Windows PC and you can do all these tasks in a simple click. We tested this tool on our Redmi 3S and it works like a charm. Once the Redmi 3S/Prime/3X rooted you can install custom ROM on your phone and install all the rooted applications. ‘

 WARNING!

Your warranty is void if you follow the given instruction in this guide. We the Howtorootmobile.com team or the developers are not responsible for bricked devices, dead SD cards. Read all the instruction very carefully and Perform everything at your risk.

 CHECK PHONE MODEL

This guide is only for the Redmi 3S/Prime/3X Android smartphone. Don’t try this method on any of other Android devices; It may hard brick your device. So, first, confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.

Requirements to Apply

a) Bootloader Unlocked

b) FLASHER TOOLKIT Redmi 3S/Prime/3X

c) Minimal ADB and Fastboot

d) UPDATE-SuperSU-v2.76

Using FLASHER TOOLKIT To Root Redmi 3S/Prime/3X

Step 1. Download “Minimal ADB and Fastboot” and install from the above mention link and download “UPDATE-SuperSU-v2.76.zip” and move to the “Download” folder of your phone.

Step 2. After doing this connect your phone to the PC with USB cable.

Step 3. Now unzip the FLASHER TOOLKIT and run the “FLASHER TOOLKIT LANDv1.bat” in Administrator mode.

Step 4. Next, you see the menu for what you want to do, as mentioned on the highlight, choose Menu #1 to flash TWRP 3.0.0 and follow the on-screen instructions.

Step 5. Once the flashing is done successfully, you will be asked to install UPDATE-SuperSU-v2.76.zip.

Step 6. Install the Same and once finished your phone will reboot.

Now your Redmi 3S/Prime/3X is rooted, and TWRP recovery is successfully installed.

Easy Guide to Install TWRP Recovery on Galaxy S4

We all know that TWRP recovery is one of the best recovery for the Rooted Android devices. The new TWRP Recovery has the nice touch user interface which is really useful to all rooted android users to install Custom ROMs and install mod files on the android mobile and smartphone. So in simple words we can say that without Custom recovery TWRP recovery you can install custom ROMs on your android device and can’t do lots of customization on your device. So today in this guide we let you know how you can Install TWRP Recovery on Galaxy S4, the guide is divided in two different categories one the Auto method and second the manual method. Both the methods are simple and easy to.

To use this guide you need a rooted Samsung Galaxy S 4, don’t know how to root your device here is thecomplete guide to root Galaxy S 4.

Install TWRP Recovery on Galaxy S4

Before doing anything follow the below mention steps on you device:-

a) Take the Full Backup of your device with these application

b) Enable USB debugging mode on your device, read the guide here how to enable USB debugging mode.

c) Download and install Samsung Drivers from here.

After following the above mention steps and setting follow the below mention guide to root your device.

1st Method:- Install TWRP Recovery on Galaxy S4 With GooManager Android Application

Step 1. Go to the Google play store from your Android device and install the GooManager.

Step 2. Once the installation is complete on your device, run the application on your Samsung Galaxy S 4. From the menu option of the application click on “Install OpenRecoveryScript”.

Step 3. Now from the next screen Choose “Yes”.

And Double-check that the end of the filename matches your device name and hit “Yes”.

AT&T Galaxy S4 = jflteatt
T-Mobile Galaxy S4 = jfltetmo
Sprint Galaxy S4 = jfltespr
Verizon Galaxy S4 = jfltevzw
GT-i9505 Galaxy S4 = jfltexx
Canadian Galaxy S4 = jfltecan
US Celluar Galaxy S4 = jflteusc

Now wait for some seconds to install the TWRP recovery on your Samsung Galaxy S 4. If the above mentioned method will not work on your device then try the below mention second method to install TWRP Recovery on Galaxy S4.

2nd Method:- Manually Install TWRP Recovery on Galaxy S4

Step 1. Download the TWRP recovery for Samsung Galaxy S4 I9500 from here and Samsung Galaxy S4 I9505 from here.

Step 2. After that Download the ODIN application on your desktop to flash the recovery on your device.

Step 3. Switch off your Galaxy S4. Boot the device into Download mode: reboot the phone by holding Volume Down, Home and Power buttons simultaneously.

Step 4. Now run the ODIN application on your desktop and connect your Device to PC with USB cable and Odin will detect the SGS4 and ID:COM on Odin box will turn yellow along with an ADDED!! message.

Step 5. Now on the ODIN screen click PDA button and browse the TWRP recovery file that you downloaded on step 1.

Step 6. Next, ensure that the check boxes “Auto Reboot”, “F. Reset Time” and “PDA” are the only check boxes checked and the rest are not. Click the Start button and Wait for Android to boot.

Step 7. Now the installation process will take some and when the process is completed successfully, your Galaxy S4 will restart automatically and you will get a PASS message on Odin. Unplug your phone from computer.

That’s it, now you have installed TWRP recovery on your Samsung Galaxy S4. Now you can install custom ROMs on your Galaxy S4 with the help of TWRP recovery.

How to Manually Update Galaxy S3 to I9300XXUFME7 Android 4.2.2 Firmware

I9300XXUFME7 Android 4.2.2 Firmware for Samsung Galaxy S3 is released now, this one is the latest official firmware from the Samsung to Galaxy S 3 users. The new Firmware comes with some new features and some new improvements such as New S4 Lockscreen: Multiple Widgets, two Unlock effects (Ripple and Light), Daydream, Driving mode, Full screen Samsung apps, New S-Voice (from S4) and more, As you can see the new Firmware is powered with some new Galaxy S 4 feature, which you can enjoy on your Samsung Galaxy S3 with this new latest I9300XXUFME7 Android 4.2.2 Firmware. So today in this guide we let you know How to Manually Update Galaxy S3 to I9300XXUFME7 Android 4.2.2 Firmware.

Samsung Galaxy S3 to I9300XXUFME7 Android 4.2.2 Firmware Details:-

Android Version: 4.2.2 – JDQ39 (Jelly Bean)
PDA: I9300XXUFME7
CSC: I9300OXAFME7
MODEM: I9300XXUFME7
Region: Open Europe
Carrier: Unbranded
Changelist: 702147 (Previous leak: I9300XXUFME3 = 611730)
Build Date: 21 May 2013

Manually Update Galaxy S3 to I9300XXUFME7 Android 4.2.2 Firmware

WARNINGS: This is a PRE-RELEASE firmware, Its same like the Official version but for testing purpose and it DOESN’T increase the binary counter nor changes the system state. Follow this guide at your own risk. HowToRootMobile.com won’t be responsible in case your device gets damaged in any other way during the process.

But before following this tutorial download the below mention files on your desktop and install it on your PC to follow the below guide and also enable some setting on your device.

a) Take the Full Backup of your device with these application

b) Enable USB debugging mode on your device, read the guide here how to enable USB debugging mode.

c) Download and install Samsung Drivers from here.

How to Manually Update Galaxy S3 GT I9300 with Official Jellybean 4.2.2 XXUFME7 Firmware

Step 1. First download the latest Android 4.2.2 I9300XXUFME7 Jelly Bean leak firmware for Samsung Galaxy S3 to the computer and extract it on your desktop to update your Galaxy S3.

Step 2. Now Download the ODIN flash tool on your desktop and extract the same on your desktop, you have to run this ODIN application on your PC to update your device with the latest firmware.

Step 3. Now turn off your Samsung Galaxy S3 mobile and enter in into download mode, to do this Press and hold Home + Power + Volume down buttons and when a triangle appears on the phone screen. after that hit the Power button again to continue to enter Download Mode.

Step 4. Now you device is in download mode to flash the new firmware, now run the ODIN application and connect your device to PC with USB cable and wait until you get a blue sign in Odin. Now from the ODIN scree click the PDA button and browse the firmware file “I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5” that you downloaded on before on Step 1. Make sure re-partition is NOT ticked on the ODIN application.

Step 5. Now hit the “Start” button from the ODIN screen and these will start the update process on your device.

Note: If you encounter any issues with the firmware (Any FC, Bootloop etc) Boot your Galaxy S 3 into recovery mode (Home+ Power + Volume Up) Then from the recovery menu choose to wipe/factory reset. (This will delete all of your data including your device internal SD card). After that choose reboot and you should be good to go.

That’s it, now you Samsung Galaxy S3 mobile is updated with the latest Android 4.2.2 I9300XXUFME7 Firmware. Do let us know in the comments section or on out Facebook / Google+ Page if you face any issues.

How to Update Sony Xperia ZL C6506 with Android 4.2.2

Finally Sony released the new Android 4.2.2 official firmware for its Sony Xperia ZL C6506 smartphone users. The new official firmware has some new feature and improvement such as improved launcher, lockscreen widgets and some cool new animations. You can get this update via OTA and install it on your Sony Xperia ZL C6506 mobile phone. The firmware is latest firmware for the device and available for some carriers now, but very soon it will be available for all. So do check the firmware updates on your device.

Below are the detail of Latest firmware for Sony Xperia ZL C6506

Baseband version: 9x15A-ACEFWMZQ-30110049-34
Build Number: 10.3.A.0.423
Build Date: May 17th, 2013
Version: Android 4.2.2 JDQ39

Update Sony Xperia ZL C6506 with Android 4.2.2

How to Update Sony Xperia ZL C6506 with Android 4.2.2

Go to your Sony Xperia ZL C6506 smartphone and click on the setting of your device and then About phone > Software updates > System updates. Now this will help you to check the latest update on your device and allows you to instal the latest Android 4.2.2 firmware on your device.

Guide to Install Android 4.2.2 on Xperia ZL using PC Companion / Bridge for Mac

You can also update your device with the help of your Windows or MAC. Here is the guide which allows you to do the same if you don’t want to use the OTA method on your device. Follow the steps one by one to install the update on your device.

Step 1. Download and install below mention application on your Windows or MAC.

• Windows: Download & install PC Companion
• Mac OS X: Download & install Bridge for Mac

Step 2. After the installation of the application, connect your Sony Xperia ZL C6506 to the PC or MACvia the USB cable.

Step 3. Once the device is connected, run the application on your desktop to get the update on your device. Very soon the application will check for the update and notifies you on the screen that “New Xperia software version available”.

Step 4. Click on “Update” button and follow on screen instructions to download and install the update. This will update your device with the latest firmware.

Now to check the update Again got your device Settings > About phone > Build number / version and check for the software version.