Before You Begin:
- You need a Windows based PC or Laptop.
- This stock rom is only for Samsung Galaxy S3 I9300.
- Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
- Enable USB Debugging in your Samsung Galaxy S3.Click Here if you don’t know how to enable.
- Your device must be charged 50% minimum.
- Make backup of device data for safety.
Download Required Files:
How To Update Android 4.3 On Samsung Galaxy S3 I9300:
- Download both Odin & Firmware Package in your PC.
- Extract both Odin & Firmware Package in your PC.
- Now Turn off your device completely.
- Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
- Now launch the Odin .exe file and connect your device to PC with USB cable.
- Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
- Now select files as per below instructions to install Android 4.3 jellybean on Samsung Galaxy S3
- Click on PDA button in Odin and select file with “CODE” in its name
- Click on Phone button in Odin and select file with “MODEM” in its name
- Click on CSC button in Odinand select file with “CSC” in its name
- Click on PIT button in Odin and select file with “.pit” in its name
- Only check Auto Reboot & F.Reset option, don’t tick any other option.
- Now click on Start button in Odin to start the installation process.It take few minutes to finish.
- You will see a PASS message in Odin message box after successful installation.
- Your device reboot automatically.First boot can take few minutes.
If you want to root your Samsung Galaxy S3 on Android 4.3 jellybean follow the method given here
No comments:
Post a Comment