How to Downgrade Your Samsung Galaxy Gear from Tizen to Android

Learn How to Downgrade Your Samsung Galaxy Gear from Tizen to Android with easy method and instructions.

I.  Before You Begin

1.  This procedure only applies to the original Samsung Galaxy Gear (SM-V700) running Tizen; do not try this on the Samsung Galaxy Gear 2.

2.  Make sure you have the necessary drivers installed for this procedure to work before you start.

II.  Necessary Downloads

1.  SM-V700_tizen_to_android.zip [Download link available in this post]

2.  Odin3_v3.09.zip

III.  Flashing Android to Samsung Galaxy Gear

1.  Extract SM-V700_tizen_to_android.zip to a folder on your desktop.

2.  Extract the Odin_v3.09.zip file you downloaded above to a folder on your desktop.

3.  From the extracted folder, double-click on Odin3 v3.09.exe to run the tool.

4.  Put your device into recovery mode.  To do this, with the device on, press and hold the power button until you see the message ‘rebooting.’  Now, press the power button a few times until you see a menu; use the Volume Up and Down buttons to select Download, then press and hold the Power button.

5.  Connect your device to your PC using a compatible USB cable.  The ID:COM field on Odin should now light up blue and you should see the “ADDED!” message to signify that your device is connected and recognized properly.  If not, reinstall drivers and try again.

5.  Click on AP button, locate 1_dn_android.tar from the extracted SM-V700_tizen_to_android folder and click on OK to load it on Odin.  Click on the PIT button, locate ls02_android.pit and click on OK to load it on to Odin.

5.  Make sure that the Re-Partition and Flash Lock are unchecked, and only Auto-Reboot is checked.  This is important as you might brick your device if these options are ticked!

6.  Click on Start.

7.  Once you see the message ‘PASS,’ let your device reboot.

IV.  Flashing Android Recovery

Follow the same steps as in Section III, but use the 2_recovery.img.tar file this time.  Let your device reboot once done.

You have now successfully downgraded your Samsung Galaxy Gear to Android!

How To Update Sprint Galaxy S3 To Android 4.4.2 Kitkat

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Sprint Samsung Galaxy S3.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin V3.09 (V3.09 download link given in last of that page)
• Official Stock Firmware / Mirror

How To Update Android 4.4.2 Kitkat On Sprint Samsung Galaxy S3 :

1. Download both Odin & Firmware Package in your PC.
2. Extract both Odin & Firmware Package in your PC.
3. Now Turn off your device completely.
4. Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
5. Now launch the Odin .exe file and connect your device to PC with USB cable.
6. Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
7. Now select files as per below instructions to install Android 4.4.2.Kitkat on Sprint Samsung Galaxy S3.
8. If only one file is available in the Stock Firmware zip package of .tar.md5 extension. Then click on PDA button in Odin and select file that file. If there are other file also in zip file then select files according to given below, otherwise move to the next step:

• Click on Phone button in Odin and select file with "MODEM" in its name
• Click on CSC button in Odinand select file with "CSC" in its name
• Click on PIT button in Odin and select file with ".pit" in its name

1. Only check Auto Reboot & F.Reset  option, don’t tick any other option.
2. Now click on Start button in Odin to start the installation process.It take few minutes to finish.
3. You will see a PASS message in Odin message box after successful installation.
4. Your device reboot automatically.First boot can take few minutes.

Great!! Sprint Samsung Galaxy S3 is successfully updated to Android 4.4.2. kitkat. If you want to get Root Access back Click Here

Source

How To Flash Stock Firmware And Unroot Samsung Galaxy S5 (All Variants)

In this article you'll find out How To Flash Stock Firmware And Unroot Samsung Galaxy S5 [All Variants] with easiest method and step by step instructions. Samsung Galaxy S5 is the most popular smartphone from Samsung till now. Samsung reported that 10 million units shipped of Samsung Galaxy S5 in just 25 days after launch. In our last few article we wrote about How To Root Samsung Galaxy S5 in different variants and carriers. If you are facing any type of lag or error after rooting your device then you can easily Unroot your device with this method.

Some Important Links For Samsung Galaxy S5:

• How To Root T-Mobile Samsung Galaxy S5 G900T
• How To Root Samsung Galaxy S5 G900H Easy Method
• How To Install CWM Custom Recovery In Samsung Galaxy S5
• How To Root Samsung Galaxy S5 SM-G900F On Android 4.4.2 Kitkat
• How To Root Sprint Samsung Galaxy S5 SM-G900P
• How To Root Canadian Samsung Galaxy S5 SM-G900W8
• How To Root US Cellular Samsung Galaxy S5 SM-G900R4
• How To Root MetroPCS Samsung Galaxy S5 SM-G900T1
• How To Root Vodafone Samsung Galaxy S5 SM-G900M

Before You Begin:

• Make sure that your device is charged more than 60%.
• This method is only for Samsung Galaxy S5. Don't try this method on any other device.
• Backup all your important data first.
• Download & Install Samsung Galaxy S5 USB Drivers in your PC.
• Enable USB Debugging in your device. Click Here if you don't know How To Enable USB Debugging.
• Exit/Disable Samsung Kies and Antivirus in your PC.

Download Required Files:

• Odin3  V3.09

Download & extract latest stock firmware for your device in your PC.

• International Galaxy S5 (Exynos) – SM-G900H
• International Galaxy S5 (LTE) – SM-G900F
• Asian Galaxy S5 – SM-G900I
• Canadian Galaxy S5 – SM-G900W8
• At&t Galaxy S5 – SM-G900A
• T-Mobile Galaxy S5 – SM-G900T
• Sprint Galaxy S5 – SM-G900P
• US Cellular Galaxy S5 – SM-G900R4
• VodaFone Samsung Galaxy S5 – SM-G900M
• Verizon Samsung Galaxy S5 – SM-G900V
• MetroPCS Samsung Galaxy S5 – SM-G900T1

How To Flash Stock Firmware And Unroot Samsung Galaxy S5:

• Download and extract Odin3 V3.09 in your PC.
• Open Odin3 folder and run Odin3.exe file in your PC.
• In boot your device in Download Mode. To do so, turn off your device completely and wait for 10 seconds. Now press and hold Volume Down + Home Button + Power Key simultaneously and turn your device ON (If you see any warning message, Press Volume Up to continue).
• Now connect your device to PC with USB cable.
• The ID:COM Box will turn blue after detecting your device (Make sure USB Drivers are installed successfully).
• Now select AP tab in Odin and select file with .tar.md5 format extracted from Stock Firmware zip file.
• Tick Auto Reboot & Factory Reset options in Odin and don't tick any other option.
• After all this, Click at Start on Odin and it will start flashing stock firmware in your device.
• After successful flashing of stock firmware, your device will reboot automatically.
• Disconnect your device from PC.

That's it, Your Samsung Galaxy S5 is successfully unrooted and running on stock firmware now.
Source

How to Update Nexus 4 to Android 4.4.1 KOT49E KitKat OTA Official Firmware

Image Credits

Before You Begin:

• Backup device storage, SMS, contacts, calenders and other stuff (This procedure won’t wipe any of your present data on the phone, but we prefer to be at a safe side, always)
• If your device is running on Jellybean update to Android 4.4 Kitkat from Here
• Enable USB Debugging in your Nexus 4. Read guide here how to enable USB Debugging in Android devices.
• Make sure your Nexus 4 is charged al least 60%.
• Download & Install Latest Nexus 4 drivers in your PC.

Download Required Files:

• Android 4.4.1 Kitkat Update For Nexus 4

How To Update Nexus 5:

• Please follow all steps given above before you begin to next steps.
• Download the Nexus 4 Android 4.4.1 update file in your PC or Device and rename the update file to update.zip.
• Now connect your phone to the PC with USB cable and move the rename zip file update.zip to your SD card. Make sure the file is in the root folder.
• Now turn off your device and boot it in Bootloader mode.To do this Press and hold the Volume Up + Volume Down + Power buttons till you see the Fastboot menu.
• Follow the navigation instructions on the screen. Press Volume Up button several times till you see RECOVERY and press Power button to select it. You will get an exclamation mark now. Again hold your Volume Up + Power buttons. You should now see the Recovery Mode menu.
• Now you are in Recovery mode. From the recovery menu click on the update from sd card option. Now select the update.zip file confirm selection with Power button and install Android 4.4.1 update in your device.
• After completion of update, your device will reboot automatically or select reboot system now from recovery menu.
• First boot will take more time. Be patient ...

How to Update Asus Nexus 7 to Android 4.4.1 KOT49E KitKat OTA Official Firmware

Image Credits

Before You Begin:

• Backup device storage, SMS, contacts, calenders and other stuff (This procedure won’t wipe any of your present data on the phone, but we prefer to be at a safe side, always)
• Enable USB Debugging in your Nexus 7. Read guide here how to enable USB Debugging in Android devices.
• Make sure your Nexus 7 is charged al least 60%.
• Download & Install Latest Nexus 7 drivers in your PC.

Download Required Files:

• Android 4.4.1 Kitkat Update For Nexus 7

How To Update Nexus 7:

• Please follow all steps given above before you begin to next steps.
• Download the Nexus 7 Android 4.4.1 update file in your PC or Device and rename the update file to update.zip.
• Now connect your phone to the PC with USB cable and move the rename zip file update.zip to your SD card. Make sure the file is in the root folder.
• Now turn off your device and boot it in Bootloader mode.To do this Press and hold the Volume Up + Volume Down + Power buttons till you see the Fastboot menu.
• Follow the navigation instructions on the screen. Press Volume Up button several times till you see RECOVERY and press Power button to select it. You will get an exclamation mark now. Again hold your Volume Up + Power buttons. You should now see the Recovery Mode menu.
• Now you are in Recovery mode. From the recovery menu click on the update from sd card option. Now select the update.zip file confirm selection with Power button and install Android 4.4.1 update in your device.
• After completion of update, your device will reboot automatically or select reboot system now from recovery menu.
• First boot will take more time. Be patient ...

How to Update Nexus 5 to Android 4.4.1 KOT49E KitKat OTA Official Firmware

Image Credits

Before You Begin:

• Backup device storage, SMS, contacts, calenders and other stuff (This procedure won’t wipe any of your present data on the phone, but we prefer to be at a safe side, always)
• Enable USB Debugging in your Nexus 5. Read guide here how to enable USB Debugging in Android devices.
• Make sure your Nexus 5 is charged al least 60%.
• Download & Install Latest Nexus 5 drivers in your PC.

Download Required Files:

• Android 4.4.1 Kitkat Update For Nexus 5

How To Update Nexus 5:

• Please follow all steps given above before you begin to next steps.
• Download the Nexus 5 Android 4.4.1 update file in your PC or Device and rename the update file to update.zip.
• Now connect your phone to the PC with USB cable and move the rename zip file update.zip to your SD card. Make sure the file is in the root folder.
• Now turn off your device and boot it in Bootloader mode.To do this Press and hold the Volume Up + Volume Down + Power buttons till you see the Fastboot menu.
• Follow the navigation instructions on the screen. Press Volume Up button several times till you see RECOVERY and press Power button to select it. You will get an exclamation mark now. Again hold your Volume Up + Power buttons. You should now see the Recovery Mode menu.
• Now you are in Recovery mode. From the recovery menu click on the update from sd card option. Now select the update.zip file confirm selection with Power button and install Android 4.4.1 update in your device.
• After completion of update, your device will reboot automatically or select reboot system now from recovery menu.
• First boot will take more time. Be patient ...

Congrats!!! Your device is successfully updated.If you want to Root & Install Custom Recovery after update Click Here.

If you want to Root your device with easy method Click Here.

How To Update Samsung Galaxy S3 With Android 4.3 Jellybean

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Samsung Galaxy S3 I9300.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin
• Official Stock Firmware

How To Update Android 4.3 On Samsung Galaxy S3 I9300:

• Download both Odin & Firmware Package in your PC.
• Extract both Odin & Firmware Package in your PC.
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
• Now select files as per below instructions to install Android 4.3 jellybean on Samsung Galaxy S3

• Click on PDA button in Odin and select file with “CODE” in its name
• Click on Phone button in Odin and select file with “MODEM” in its name
• Click on CSC button in Odinand select file with “CSC” in its name
• Click on PIT button in Odin and select file with “.pit” in its name

• Only check Auto Reboot & F.Reset  option, don’t tick any other option.
• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.First boot can take few minutes.

If you want to root your Samsung Galaxy S3 on Android 4.3 jellybean follow the method given here

How To Update LG Nexus 4 With Android 4.4 Kitkat

Before You Begin:

• You need a windows based PC or Laptop.
• Make sure your device is charged minimum 70%.
• Enable USB Debugging in your device.Click Here if you don't know how to enable.
• The device bootloader must be unlocked.Click Here if bootloader is not unlocked.
• Don't forgot to make a backup of your data.

Download Required Files:

• Android SDK (For Installation & Setup Help Click Here)
• Android 4.4 kitkat update

How To Update Android 4.4 in Nexus:

• Connect your nexus device to your computer.
• Navigate to C:\Program Files\Android SDK\sdk\platform-tools on your computer.
• Now copy the extracted files (from update package,Copy the extracted files not the extracted folder) to the path mentioned above (C:\Program Files\Android SDK\sdk\platform-tools).
• Now hold Shift Key on the keyboard and give Mouse Right Click (keep hold Shift Key) to appear pop-up menu and select Open command window here (from the pop-up menu).As shown in picture...

• A command window will appear.Type adb reboot bootloader in command window and hit enter button.
• Once you are in bootloader mode.Close the command window.
• Now run the flash-all.bat file to start the update process.(from C:\Program Files\Android SDK\sdk\platform-tools)
• Now wait for the process to complete.
• Once the process is completed,your device will reboot automatically.
• Please be patience,first boot can take 4-5 minutes.

Congrats!!! your Nexus Device is updated with the latest Android 4.4 Kitkat...

How to Root and Install Custom Recovery in the Galaxy Nexus and the LG Nexus 4 running Android 4.3

LG Nexus 4 and Galaxy Nexus got Android 4.3 update.

If you want to update Android 4.3 on LG Nexus 4 follow this method : Here

Today we will show you how to root and Install custom recovery in  LG Nexus 4 and Galaxy Nexus

1. Before Your Begin:

1. This method is tested on Nexus 4 & Galaxy Nexus (Please don’t try on other devices or Contact us for tutorials for you device).
2. Your Device Bootloader must be unlocked.Follow This method for unlocking
3. You Need a Windows based PC or Laptop for this procedure.
4. Enable USB Debugging in your device (Don’t Know How To??? Follow this)
5. Download & Install Google Nexus  USB Drivers and then connect you device with PC for complete the installation.
6. Your device must be charged 50% minimum,If not please charge your device first.
7. Make a Backup of your device data for safety.

2. Download Required Files:

1. TWRP Recovery 2.6.0.0 (For Galaxy Nexus)
2. TWRP Recovery 2.6.0.0 (For LG Nexus 4)
3. SuperSU zip file
4. Fastboot+ADB(20926)

3.  Install Of Custom TWRP Recovery in Nexus 2013:

1. Download TWRP Recovery Img file in your PC and rename it recovery.img
2. Copy the recovery.img file in C:\fastboot\win32\  folder.
3. Connect you device to PC with USB Cable.
4. Open the folder C:\fastboot\win32\  and Press & hold Shift button and press Right Click of mouse and select Open Command Window Here.
5. Now type adb reboot bootloader in cmd for booting your device into bootloader mode OR you boot it by pressing & hold Volume Down + Power Button.
6. Now when your device Bootloader mode connect it to PC  with USB cable.
7. Type  fastboot flash recovery recovery.img and hit Enter.
8. Custom Recovery will be flashed to device.

4. How To Root Galaxy Nexus & Nexus 4:

1. Download SuperSU package from Download Section above.
2. Copy it to the Root of Internal/External memory.
3. Connect you device to PC with USB Cable.
4. Open the folder C:\fastboot\win32\  and Press & hold Shift button and press Right Click of mouse and select Open Command Window Here.
5. Now type adb reboot recovery in cmd for booting your device into bootloader mode OR you boot it by pressing & hold Volume Down + Power Button and you are in Bootloader Mode now press Volume Down twice and select Recovery Mode by pressing Power Button.
6. Select Install in Recovery Mode,Now locate & Select SuperSU zip file.
7. Now Swipe to Confirm Flash (It is for confirmation Swipe it).
8. It take less than a minute to process and you should see a Success message.
9. Now Reboot your device.

Congrats!!! you Nexus 7 2013 is rooted now...

How To Overclock Sony Xperia Z

Leaving no stone unturned, the Xperia Z gives you everything you need to make work and play absolutely amazing. To start with, the phone is powered by the powerful 1.5 GHz Qualcomm Snapdragon S4 Pro with 2 GB RAM. To enhance your user-experience on the Sony Xperia Z is the 5 inch TFT capacitive, full HD touchscreen.

Two things you have to love about this screen are the Touch Gesture feature that makes the screen exceptionally responsive making all those slides and scrolls smooth as ever and secondly you have to love the brilliance of theBRAVIA Engine 2 that gives you increased image quality, sharpness, contrast and saturation for an enjoyable viewing experience. To top it off, the Xperia Z employs the Android v4.1 (Jelly Bean) OS to give you all you need from this phone.

To further impress is the 13 MP primary camera with 16x digital zoom and an LED flash. The phone has a 2 MP secondary camera and full HD video recording. With 3D Surround Sound, you enjoy mind-blowing clarity on the music and video players as well as the FM radio.

But Today we will show you how to make your device more Faster,Smoother by Overclocking you Sony Xperia Z.

1. Before Your Begin:

1. Your Device must be Rooted and Custom Recovery & Unlocked Bootloader (If your device if not rooted and unlocked & custom recovery please follow this guide).

2. Download Required Files:

1. DoomKernel (Donate DoomLord for his great work)

3. Overclocking Of Sony Xperia Z:

1. Plug in your device via USB.
2. Copy the kernel .zip file to the internal storage of your device.
3. Unplug the device.
4. Open XZRecovery (should be installed by the end of out how to root procedure) and click Reboot Recovery.
5. Once in recovery mode, tap Backup, swipe to backup, and then wait for it to backup.
6. Hit back.
7. Tap Install and scroll down to find the kernel .zip file and install it.
8. Once it’s flashed, hit back.
9. Hit Reboot > System.
10. Go to the Play Store.
11. Search for and install No-frills CPU Control.
12. Open No-frills CPU Control.
13. Make sure Set on Boot is OFF.
14. Tap on the Max Clock Frequency dropdown and select the next highest frequency (do NOT jump to the highest frequency), then hit Apply, and then use the phone for a bit normally.
15. If there are no issues, then go back to the app and try the next highest frequency, then hit Apply, and then use the phone for a bit normally.
16. Repeat until you get to the highest frequency the device will allow (if it crashes or reboots then you know to use the frequency just below that one that it didn’t crash on).
17. Once you’ve settled on a new max frequency, you can check Set on Boot to have it automatically apply the new max frequency every time the phone starts (you wouldn’t want to set this before you know which frequency is good for you because otherwise if it crashed from a frequency it would just constantly crash since that frequency would be set every time the phone turned on).

Source

How To Update Android 4.3 on Google Nexus 7

Nexus 7 is built by ASUS and comes with a NVIDIA® Tegra® 3 quad-core processor so everything is faster - pages load quickly, gameplay is smooth and responsive, and running multiple apps is a breeze. Patented 4-PLUS-1™ design gives you processing power when you need it, and battery saving efficiency when you don't. Nexus 7 was designed with gaming in mind. With heart pounding quad-core performance, a vibrant 1280-by-800 high-resolution display, and sensors like a gyroscope and accelerometer - do a barrel roll then tilt, touch and tap your way to the top of the leaderboards while exploring over 700,000 apps and games on Google Play. This multi award-winning game has been heavily optimized to utilize the eight core rendering power of Tegra's GeForce GPU, so it looks and plays great on Nexus 7. With over 8 hours of HD video playback, 10 hours of web browsing or e-reading, and up to 300 hours of standby time, Nexus 7 can go the distance.

And now Google Nexus 7 also get Android 4.3 jellybean update.

Follow the guide for updating your Nexus 7 to Android 4.3:BY EditAndroid.Com

1. Before You Begin:

1. This method is only for Nexus 7 with Android 4.2.2 jellybean (Please don't try to any other device or android version).
2. You need a Windows based PC or Laptop.
3. Enable USB Debugging of your device.How to Enable??? Click Here
4. Download & Install Nexus 7 USB Drivers in your PC .After installing connect your device to PC with USB for complete the installation.
5. Your device must be charged 50% minimum for this method.
6. Create a Backup of your device data for safety.

2. Download Required files:

1. Android 4.3 for Nexus 7 (ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07.zip)

3. Updating of Google Nexus 7:

1. Download the Official Android 4.3 update file from above & Renamed it to update.zip
2. Now connect you device to PC via USB Cable and select Data Transfer Mode in your Nexus 7.
3. Now Copy & Paste the update.zip file in the root of your SD card.
4. Now Disconnect your device and power off your device.
5. Now Boot your device in Bootloader Mode (By Pressing & hold Volume Up+Volume Down+Power Key).
6. Press Volume Up button several times untill  Recovery appears on you device screen,Now press Power Button.
7. When Exclamation mark appear in your device screen,Hold Volume Up and Power Button together for Recovery Mode.
8. Now you are in Recovery Mode,Select update from sdcard and browse and select the update.zip file.
9. Wait until installation complete,the installation process can take few minutes to complete.
10. After the Installation complete,Reboot your device.
11. Please note that first boot of your device can take 5 minute (Because it will install Apps & Services in first boot).

Congrats!!! Your are successful in updating your device

If you find and problem.....Contact Us by comment below

How To Update (Flash) Android 4.3 on LG Nexus 4

Android 4.3 is unofficially available for LG Google Nexus 4 with some cool features.Today we will show you how to update (flash,install) Android 4.3 on LG Nexus 4.

For an Android experience at its purest, look no further than Google's latest flagship device, the sleek, undulated Nexus 4 from LG. Navigating your world, with this incredible device in hand is sure to become all the simpler thanks to all the cool features it's been packed with. The much-awaited Nexus 4 will cater to the smartphone geek's every fantasy, with cutting edge graphics, an HD display and a lightning-fast processor, suited to make the everyday little more exciting. The latest in the line of Google's Nexus smartphones, the Nexus 4 has no trouble in outdoing its predecessors, with regard to design, hardware and most importantly price. Running on the latest Android OS, 4.2. (JellyBean).

First Questions People ask me is What new in Android 4.3

Whats New In Android 4.3???

• T9 Phone Dialer Auto Complete
• A new Bluetooth low power consumption feature added in Android 4.3 known as Bluetooth Smart.
• Always Scan for Wifi Connection (Also when your wifi is off).
• Some New &  Upgraded Apps : New Camera App , New Gallery App , New Photo Editor , New Google Playstore v4.2.3 , Google Keep and many more.
• New Kernel ,  Graphics and Touch Driver added.
• Better Audio latency to 40ms

How to Update Android 4.3 on Nexus 4? Lets Start!!!BY EditAndroid

1. Before You Begin:

1. Works Only in LG Nexus 4 (Don't try in other devices)
2. First Unlock Bootloader or Here & Flash Custom Recovery or Here in Nexus 4  (Important) or
3. You must have a Windows Based PC or Laptop.
4. Download LG Nexus 4 Drivers from Here
5. Enable USB Debugging in your device.
6. Your device must charged 50% minimum.
7. We recommend you to make a Data Backup for safety.

2. Download Required Files:

1. Odexed Android 4.3 for LG Nexus 4 : Here
2. Deodexed Android 4.3 for LG Nexus 4 : Here (Recommended)
3. SuperSU zip file : Here

3. Updating Your LG Nexus 4:

1. Ensure you have a Nexus 4 with Unlocked Bootloader & Custom Recovery.
2. Download & Move the Downloaded Rom in Internal Storage of your device.
3. Power Off your device and Boot into Recovery Mode (By Press & Hold Power Button + Volume Up +Volume Down).Now select Recovery from the menu (Use Volume Up & Down for Navigate and Power Button for Select).You are now in Custom Recovery.
4. In Custom Recovery,goto Wipe and Wipe Cache & Wipe Dalvik Cache before flashing Android 4.3 Rom.
5. Back to main menu of you Custom Recovery and select Install.
6. Now locate and choose the Rom (Download & Moved to Internal Storage in 2nd step).
7. Confirm that you want to Flash the Rom by Swiping.
8. Wait for some minutes and you see a successful message on your device screen.
9. Now Press Reboot System from main menu of custom recovery.
10. First Boot take long time (For Installing System & Apps)
11. Download Root Checker in your device and check whether your device is rooted or not.
12. If your device is not rooted,Download the SuperSU .zip file (link given in Download Section)
13. Boot into Recovery mode again (Follow the Step 3)
14. Select Install & locate and choose the SuperSU zip file (Downloaded Above).
15. Confirm that you want to Flash the SuperSU by Swiping.
16. Wait for some times and you see a successful message on your device screen.
17. Now Press Reboot System from main menu of custom recovery.
18. Now launch Root Checker and check again.

Congrats!!! you are successful in updating your Nexus 4 and your device is also rooted now

HTC One Google Edition Android 4.2.2 Stock Rom

HTC One is now one of the most popular high end device of 2013.Its superb features and Hardware specs can compete with any smartphone available in the market now.HTC One is a strong competitor of Samsung Galaxy S4 & Sony Xperia Z.HTC One comes with Android 4.1.2 and now upgradable to 4.2.2.But other good news from HTC is that Google Edition of HTC One is now available.

What is Google Edition of Android???

Well many from you know about Google's Nexus series of smartphones & tablets.This devices come with Pure Android OS.They devices gives you pure android experience.No external skins or launchers are come in it.For example Samsung has their Touchwiz or HTC has their HTC Sense.

So know you can get that pure experience of Android OS in your HTC One (m7) or Samsung Galaxy S4...

In this post we will guide you about how to Install Google Edition of Android in your HTC One...BY EditAndroid.Com

1. Before You Begin:

1. Make sure your device battery is charged upto 60%.
2. Enable USB debugging mode (Menu (app drawer) > Settings > Manage Applications > Development > USB Debugging – check box).
3. Install HTC One drivers from Here
4. Your phone bootloader must be unlocked.
5. You phone must be rooted & with custom recovery (You can do it from here).

2. Download Required Files:

1.  Google Edition Stock Rom for HTC One

3. Install Google Edition Stock Rom in HTC One:

1. Connect your device with PC & copy downloaded file into Internal storage of your device.
2. Power Off your device.
3. Now boot in Recovery Mode by pressing VOLUME DOWN+POWER BUTTON and then select "Recovery".(Use Volume keys to move up/down & Power key for select)
4. Now select Install zip from SDcard and select the downloaded file (you copy in first step).
5. Select YES for start installing of Google Edition.
6. The installation process take few minutes to complete.
7. Now select Reboot System from the main menu of recovery.
8. First boot of device can take upto 10 mins.
9. Now your device & you is ready for enjoying the Pure Nexus Experience.

Now enjoy the Google Edition of Android in you HTC One device.....

How to Update Micromax Canvas HD to Android 4.2.1 Jellybean

Micromax A116 Canvas HD has received the Android 4.2.1 (Jelly Bean) update as the company promised. The A116 Canvas HD was launched with Android 4.1.2 (Jelly Bean).The Android 4.2.1 update for the A116 Canvas HD brings faster performance, Quick Settings, semi-transparent notification panel, Panorama in the camera and better GPS lock.Today we will show you how to update Micromax Canvas HD A116 from Android 4.1.2 to 4.2.1...BY EditAndroid

1. Before You Begin:

1. Work on Windows Based PC or Laptop
2. Download & Install  Micromax Drivers From Here
3. Make sure your phone is charged to 60% 80% to avoid battery blackout and interruption during this tutorial.
4. We recommend you make a backup on your data and media files before the tutorial.

2. Downloading Required Files:

1. Download SP Tools : Here
2. Download Stock 4.2.1 Rom : Here

3. How To Update Android 4.2.1 in Micromax Canvas 4:

1. Extract the “S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER” folder from the 4.2.1 Stock Rom RAR file (actual RAR file name 116 4.2 all.rar)
2. Extract the SP tool folder “SP_Flash_Tool_v3.1304.0.119” from the downloaded SP Tool rar file
3. Now Run Flash_Tool.exe as Administrator from the SP Tool Folder
4. Select the MT6589_Android_scatter_emmc.txt from the subfolder of S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER.
5. Now Check the USB Mode in Flash Tool.
6. Now Check the > DA Download All > Speed > Force to High Speed
7. Now Click on Download
8. Now Power Off your Micromax Canvas HD and remove battery.
9. Put the battery again into your device (Don't start your device)
10. Connect the USB Cable between your device and PC
11. Let SP Tool search your device and Download the Rom (Don't Touch your Device or PC during the Downloading Process)
12. In the process the progress bar became Red then Indigo and finally Yellow
13. Whole process take around 2-3 mins only.
14. One Green circle will come after Sucessful Installation.
15. Now you can Power On you device..

If you want to Root & Flash Custom Recovery into you device : Click Here

Now Enjoy Android 4.2.1 Jellybean with some really cool new features in your Micromax Canvas HD A116

How to Unroot the ZTE Blade 3

Maybe you’re sending in your device for warranty reasons? Maybe you just want to reclaim your warranty? Either way, this guide should help. Unrooting will reinstate the warranty of your device as well as get you back to the official stock firmware. Here’s how you can unroot your ZTE Blade 3 smartphone:

I. Before You Begin:

1. You should have rooted your device using the procedure given here.

2. You must have CWM Recovery installed on your device. If you don’t, head here to learn how you can flash it on your device.

3. This procedure should work on Windows based PCs only.

4. Your device should have at least 70% of battery life left.

II. Downloading Required Files:

1. Stock Recovery (Download the appropriate Recovery for your device)

2. Stock ROM (Download the appropriate firmware for your device)

III. Unrooting the ZTE Blade 3:

1. Place both the files you downloaded to your Desktop.

2. Extract files from the Stock ROM archive over to your Desktop. You’ll get an archive called update.zip.

3. Plug in your device to your PC using the USB cable.

4. Copy the Stock Recovery as well as update.zip files available on your Desktop over to the root of your SD card.

5. Once both the files have been copied, unplug your device from your PC.

6. Now head on over to Google Play and download and install the Quick Boot app on your device.

7. Once the app’s been installed, open it from your App Drawer.

8. Hit Recovery option in the app and your device will reboot into the CWM Recovery mode.

9. Once inside Recovery, choose install zip from sdcard followed by choose zip from sdcard.

10. Choose the Stock Recovery zip to be flashed on your device.

11. Once the stock recovery’s been flashed, reboot your device.

12. Now open the Quick Boot app once again and hit the Recovery option.

13. Once inside Recovery, choose the appropriate option to flash the Stock ROM (update.zip) file.

14. Once the flashing’s done, reboot your device.

15. You’re all done!

Brilliant! Your ZTE Blade 3 has been successfully unrooted and is back to the stock firmware.