How To Root And Install TWRP Recovery In Galaxy Note 3 Neo

Source: ThinkDigit

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working and tested on Samsung Galaxy Note 3 Neo only.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy Note 3 Neo.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Download Odin3 v3.09 flash tool
• CF-Auto-Root zip file
• TWRP Recovery Image (openrecovery-twrp-2.7.0.0-hlltexx.img.tar)

How To Install TWRP Recovery In Samsung Galaxy Note 3 Neo:

• Download both Odin & TWRP Recovery Image zip files.
• Extract Odin flash tool on your desktop
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button at same time.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed). Click on PDA button in Odin and select the TWRP Rrecovery Image tar file (openrecovery-twrp-2.7.0.0-hlltexx.img.tar). Only check Auto Reboot & F.Reset  option, don’t tick any other option like given below.

• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.

That's it!! Custom Recovery is successfully installed in your device. If you want to boot into Recovery Mode, Power Off your device, Press and hold Volume Up + Home Button + Power Button at same time until you see Recovery Mode.

How To Root Samsung Galaxy Note 3 Neo:

• The method of installing TWRP Recovery and Rooting Note 3 Neo is almost same.
• Download and extract Odin zip file on desktop.
• Download and extract CF-Autoroot zip file on same folder where Odin is extracted in previous step.
• Now turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button at same time.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed). Click on PDA button in Odin and select theCF-Auto Root Image tar file (CF-Auto-Root-hllte-hlltexx-smn7505.tar.md5). Only check Auto Reboot & F.Reset  option, don’t tick any other option like given below.
• 
• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.

Congrats! Your Samsung Galaxy Note 3 Neo is successfully rooted now and have TWRP Custom Recovery installed.

Source

How To Update Android 4.4.2 Kitkat On Samsung Galaxy Note 8.0

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Samsung Galaxy Note 8.0.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy Note 8.0.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin V3.09 (V3.09 download link given in last of that page)
• Official Stock Firmware / Mirror

How To Update Android 4.4.2 Kitkat On Samsung Galaxy Note 8.0:

1. Download both Odin & Firmware Package in your PC.
2. Extract both Odin & Firmware Package in your PC.
3. Now Turn off your device completely.
4. Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
5. Now launch the Odin .exe file and connect your device to PC with USB cable.
6. Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
7. Then click on PDA button in Odin and select the extracted file with .tar.md5 extension.

1. Only check Auto Reboot & F.Reset  option, don’t tick any other option.
2. Now click on Start button in Odin to start the installation process.It take few minutes to finish.
3. You will see a PASS message in Odin message box after successful installation.
4. Your device reboot automatically.First boot can take few minutes.

That's it!! Your Samsung Galaxy Note 8.0 GT-N5100 is successfully updated to Android 4.4.2 kitkat.

Source

How To Root Sprint Galaxy S3 After Android 4.4.2 Kitkat Update

Before You Begin:

• You need a Windows based PC or Laptop.
• You device must be updated to Android 4.4.2 kitkat.
• This method is working and tested on Sprint Galaxy S3 only.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Download Odin3 v3.07 flash tool  (Important For All)
• CF-Auto-Root zip file

How To Root Sprint Galaxy S3:

• Download both Odin & CF-Auto-Root zip files.
• Extract Odin flash tool on your desktop
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button at same time.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed). Click on PDA button in Odin and select the CF-Auto-Root tar file. Only check Auto Reboot & F.Reset  option, don’t tick any other option like given below.

• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.

Congrats!!! Your Sprint Galaxy S3 is rooted on Android 4.4.2 kitkat successfully.
Source

How To Update Sprint Galaxy S3 To Android 4.4.2 Kitkat

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Sprint Samsung Galaxy S3.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin V3.09 (V3.09 download link given in last of that page)
• Official Stock Firmware / Mirror

How To Update Android 4.4.2 Kitkat On Sprint Samsung Galaxy S3 :

1. Download both Odin & Firmware Package in your PC.
2. Extract both Odin & Firmware Package in your PC.
3. Now Turn off your device completely.
4. Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
5. Now launch the Odin .exe file and connect your device to PC with USB cable.
6. Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
7. Now select files as per below instructions to install Android 4.4.2.Kitkat on Sprint Samsung Galaxy S3.
8. If only one file is available in the Stock Firmware zip package of .tar.md5 extension. Then click on PDA button in Odin and select file that file. If there are other file also in zip file then select files according to given below, otherwise move to the next step:

• Click on Phone button in Odin and select file with "MODEM" in its name
• Click on CSC button in Odinand select file with "CSC" in its name
• Click on PIT button in Odin and select file with ".pit" in its name

1. Only check Auto Reboot & F.Reset  option, don’t tick any other option.
2. Now click on Start button in Odin to start the installation process.It take few minutes to finish.
3. You will see a PASS message in Odin message box after successful installation.
4. Your device reboot automatically.First boot can take few minutes.

Great!! Sprint Samsung Galaxy S3 is successfully updated to Android 4.4.2. kitkat. If you want to get Root Access back Click Here

Source

How To Root And Flash Custom Recovery In Motorola Moto E

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working and tested on Motorola Moto E with Unlocked Bootloader only. You can Unlock Bootloader from official site.
• Download and Install Moto E USB Drivers.
• Enable USB Debugging in your Motorola Moto E.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• msfastboot-v2
• Unofficial TWRP Recovery Image
• SuperSU zip file

How To Root And Flash Custom Recovery In Motorola Moto G:

• Follow all the steps given in Before You Begin section first.
• Download and Extract msfastboot-v2 zip file in a folder of your computer.
• Now download and move Unofficial TWRP Recovery image in the folder same folder of msfastboot-v2.
• Turn Off your device completely. Press and hold Volume Down + Power Button at same time for few seconds and it'll boot your device in Fastboot mode.
• Connect your device to PC with USB Cable (Make sure USB drivers are installed successfully).
• Now open the folder where msfastboot-v2 is extracted, Press SHIFT button + Mouse right click and select Open command window here.
• A command window will appear on your desktop, type fastboot flash recovery moto_e_twrp2.7.0.0_v1.2.img
• Flashing will take few seconds after flashing turn off your device again.
• Now boot your device again in Fastboot mode and press Volume Down to select Recovery and then Volume Up to boot into Recovery mode.
• Your device will go to Recovery Mode now, tap on Install  and select SuperSU zip file and flash it.
• After flashing SuperSU zip file, go to main menu of Recovery and select Reboot System option.

That's it! Your Moto E is successfully rooted now and have Custom Recovery installed.

Source: XDA Forums

How To Flash Stock Firmware And Unroot Samsung Galaxy S5 (All Variants)

In this article you'll find out How To Flash Stock Firmware And Unroot Samsung Galaxy S5 [All Variants] with easiest method and step by step instructions. Samsung Galaxy S5 is the most popular smartphone from Samsung till now. Samsung reported that 10 million units shipped of Samsung Galaxy S5 in just 25 days after launch. In our last few article we wrote about How To Root Samsung Galaxy S5 in different variants and carriers. If you are facing any type of lag or error after rooting your device then you can easily Unroot your device with this method.

Some Important Links For Samsung Galaxy S5:

• How To Root T-Mobile Samsung Galaxy S5 G900T
• How To Root Samsung Galaxy S5 G900H Easy Method
• How To Install CWM Custom Recovery In Samsung Galaxy S5
• How To Root Samsung Galaxy S5 SM-G900F On Android 4.4.2 Kitkat
• How To Root Sprint Samsung Galaxy S5 SM-G900P
• How To Root Canadian Samsung Galaxy S5 SM-G900W8
• How To Root US Cellular Samsung Galaxy S5 SM-G900R4
• How To Root MetroPCS Samsung Galaxy S5 SM-G900T1
• How To Root Vodafone Samsung Galaxy S5 SM-G900M

Before You Begin:

• Make sure that your device is charged more than 60%.
• This method is only for Samsung Galaxy S5. Don't try this method on any other device.
• Backup all your important data first.
• Download & Install Samsung Galaxy S5 USB Drivers in your PC.
• Enable USB Debugging in your device. Click Here if you don't know How To Enable USB Debugging.
• Exit/Disable Samsung Kies and Antivirus in your PC.

Download Required Files:

• Odin3  V3.09

Download & extract latest stock firmware for your device in your PC.

• International Galaxy S5 (Exynos) – SM-G900H
• International Galaxy S5 (LTE) – SM-G900F
• Asian Galaxy S5 – SM-G900I
• Canadian Galaxy S5 – SM-G900W8
• At&t Galaxy S5 – SM-G900A
• T-Mobile Galaxy S5 – SM-G900T
• Sprint Galaxy S5 – SM-G900P
• US Cellular Galaxy S5 – SM-G900R4
• VodaFone Samsung Galaxy S5 – SM-G900M
• Verizon Samsung Galaxy S5 – SM-G900V
• MetroPCS Samsung Galaxy S5 – SM-G900T1

How To Flash Stock Firmware And Unroot Samsung Galaxy S5:

• Download and extract Odin3 V3.09 in your PC.
• Open Odin3 folder and run Odin3.exe file in your PC.
• In boot your device in Download Mode. To do so, turn off your device completely and wait for 10 seconds. Now press and hold Volume Down + Home Button + Power Key simultaneously and turn your device ON (If you see any warning message, Press Volume Up to continue).
• Now connect your device to PC with USB cable.
• The ID:COM Box will turn blue after detecting your device (Make sure USB Drivers are installed successfully).
• Now select AP tab in Odin and select file with .tar.md5 format extracted from Stock Firmware zip file.
• Tick Auto Reboot & Factory Reset options in Odin and don't tick any other option.
• After all this, Click at Start on Odin and it will start flashing stock firmware in your device.
• After successful flashing of stock firmware, your device will reboot automatically.
• Disconnect your device from PC.

That's it, Your Samsung Galaxy S5 is successfully unrooted and running on stock firmware now.
Source

How To Root And Install TWRP Recovery On Oppo Find 7a

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working and tested on Oppo Find 7a only.
• Download and Install Oppo USB Drivers
• Enable USB Debugging in your Oppo Find 7.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Requried Files:

• Install Android SDK and Setup ADB
• Download DV.zip file
• TWRP Recovery Image (openrecovery-twrp-2.7.0.0-find7a.img)
• SuperSU zip file (UPDATE-SuperSU-v1.9.zip)

How To Install TWRP Custom Recovery On Oppo Find 7a:

• Follow all the steps given in Before You Begin and Download Section carefully.
• Download and extract DV.zip file on your desktop (You will find a DVfolder in zip file)
• Now move the download TWRP Recovery Image (openrecovery-twrp-2.7.0.0-find7a.img) to the DVfolder on desktop.
• Power Off your device completely. Now press and hold Volume Up and Power Button together until you see fastboot (bootloader) mode.
• Connect your device to PC with USB cable.
• Open the DVfolder on desktop. Press Right Click while holding SHIFT key on empty space inside folder. Right Click menu will appear. Select Open Command window here.
• A CMD window will open in your PC. Type the following command in CMD and hit Enter (This will flash TWRP Custom Recovery in your device).

  fastboot flash recovery openrecovery-twrp-2.7.0.0-find7a.img

• Flashing of Custom Recovery Image will take few second.
• Now type following command in CMD and hit Enter button again.

  fastboot reboot

This command will reboot your device in normal mode. That's it, Custom Recovery is successfully installed in your device. If you want to boot your device in Recovery Mode, Power Off your device, Now Press and Hold Volume Down and Power Button together until you see TWRP Recovery.

How To Root Oppo Find 7a:

• Download SuperSU zip file (UPDATE-SuperSU-v1.9.zip) from Download Section given above.
• Connect your device to PC and move SuperSU zip file (UPDATE-SuperSU-v1.9.zip) in your Oppo Find 7a.
• Disconnect your device from PC.
• Reboot your device in Recovery Mode. Press & Hold Volume Down + Power Button at the same time until you see  Recovery Mode.
• In Recovery Mode tap on Install and select the SuperSU zip file (UPDATE-SuperSU-v1.9.zip).
• Confirm your selection.
• Once the flashing of zip file successfully go back to main menu of  Recovery Mode and select reboot system now.

Congrats!! Your device is successfully rooted now..
Source