How to Unroot the Nexus 6P (Toolkit Method)

I. Before You Begin

This will only work on Windows as it requires a toolkit to make it a lot easier that requires Windows.

This will wipe your device so please back it up before beginning.

II. Download & Install the Toolkit

1. Head to the toolkit developer’s site here and download the latest version of the toolkit and save it to your desktop (donate to him if, after all of this, you find this toolkit helpful).
2. Right-click the exe that you just downloaded and select Run As Administrator and install it.
3. When it opens select your model and build number and click Apply (you can find this info in the Settings > About section of your device).

III. Enable USB Debugging

1. On the phone, head to Settings > About and then continuously tap on Build Number until it says you are a developer.
2. Tap Back then tap the new Developer Options menu that appeared and scroll down to USB Debugging and enable that, then enable OEM Unlock as well.
3. Plug the Nexus in via the USB cable to your computer.
4. A dialog should pop up on your phone at this point saying “Allow USB Debugging?”. When it does check Always Allow and tap OK.

If that dialog didn’t pop up, head to my How To Setup ADB tutorial and follow those instructions to get the drivers working, then return here when that’s done to continue.

After that, the toolkit will tell you need to download some files, click “Download + Update All File Dependencies” and wait for that.

IV. Unroot the Nexus 6P

1. Click Flash Stock + Unroot in the toolkit and follow the prompts for it to download the appropriate stock firmware and then it’ll flash it to the device.
2. Once done, the device will reboot and you’ll be back to the stock firmware, but if you want to also relock the bootloader, you can do so below.

V. Relock the Bootloader

1. Click OEM Lock in the toolkit and follow the prompts. It’ll reboot the phone into bootloader mode and relock the bootloader.
2. After that, it should reboot the phone and you’re all set.

How to Unroot the Samsung Galaxy J1 Ace

I. Before You Begin

1. You should’ve rooted your device using our how to root the Samsung Galaxy J1 Ace procedure.

2. This should get your device back to the stock.

3. This should erase the data stored on your device; so please backup everything that wish to keep.

4. You must have a Windows based PC to do this procedure.

5. You should have Samsung USB drivers installed on your PC. Install them if they aren’t already.

6. The following procedure should work on a number of variants of the Samsung Galaxy J1 Ace.

How to Unroot the Samsung Galaxy J1 Ace

To unroot the device, what you’ll do is flash the stock firmware on the device that’ll remove root-access and put back all the default goodies. Here’s how:

II. Downloading Required Files

1. Download Odin and save it to your desktop.

Odin

2. Download the Stock Firmware for your variant and save it to your desktop.

Stock Firmware for SM-J110F

Stock Firmware for SM-J110G

Stock Firmware for SM-J110H

Stock Firmware for SM-J110M

III. Unrooting the Samsung Galaxy J1 Ace

1. Unzip files from both Odin and Stock Firmware over to your desktop by right-clicking on each of them and selecting Extract here.

2. When the files are extracted, double-click on Odin executable and it’ll launch.

3. When the Odin launches, click on PDA and choose Stock Firmware .tar that you extracted from the archive to be flashed on your device.

4. Uncheck Repartition if it’s already checkmarked in the Odin.

5. Checkmark both Auto Reboot and F. Reset Time options in the Odin.

6. Turn off your device.

7. Reboot your device into the download mode. To do so, hold down Volume DOWN, Home, and Power buttons together for a few seconds.

8. Press Volume UP and your device should be in download mode.

9. Plug in your device to your PC using a USB cable.

10. Hit Start in the Odin and it’ll start flashing stock firmware on your device.

11. Wait for the Odin to flash stock firmware on your device.

12. When the Odin’s done flashing firmware, your device should automatically reboot.

13. You are now unrooted!

How to Unroot the Samsung Galaxy S5 (Verizon)

I. Before You Begin

1. You should’ve rooted your device using our how to root the Verizon Samsung Galaxy S5 procedure.

2. This should get your device back to the stock.

3. This will wipe off everything stored on your device; so please backup everything that you wish to keep.

4. You must have a PC that runs Windows in order to do this procedure.

5. You should have Samsung USB drivers installed on your PC. Install them if they aren’t already.

6. You should only try this on the SM-G900V variant of the device.

How to Unroot the Samsung Galaxy S5 (Verizon)

Photo Credit: phonenews.com

To unroot the device, you’ll flash the stock firmware using Odin. That’ll remove root-access and get your device back to the stock. Here’s how to do that:

II. Downloading Required Files

1. Download Odin and save it to your desktop.

Odin

2. Download Stock Firmware and save it to your desktop.

Stock Firmware for SM-G900V

III. Unrooting the Samsung Galaxy S5 (Verizon)

1. Uncompress files from both Odin and Stock Firmware by right-clicking on each of them and selecting Extract here.

2. Double-click on Odin executable and it’ll launch.

3. When the Odin launches, click on PDA and navigate to your desktop and select Stock Firmware .tar to be flashed on your device. That’s the file that you’ve extracted from the archive.

4. Uncheck the Repartition option if it’s already checkmarked in the Odin.

5. Checkmark both Auto Reboot and F. Reset Time options in the Odin.

6. Turn off your device.

7. Reboot your device into download mode by holding down Volume DOWN, Home, and Power buttons together for a few seconds.

8. Hit Volume UP when prompted and you’ll be in download mode.

9. Plug in your device to your PC using a USB cable.

10. Hit Start in the Odin and it’ll start flashing stock firmware on your device.

11. Wait for the Odin to flash the firmware on your device.

12. When the Odin’s done flashing firmware, your device should automatically reboot.

13. You’re now unrooted!

How to Unroot the Oppo R7 Lite

I. Before You Begin

1. This doesn’t flash a stock ROM on the device; this only removes root access and flashes back the stock recovery.

How to Unroot the Oppo R7 Lite

To unroot the device, you’ll first flash back the stock recovery using Flashify and then use an app to remove the root access. Here’s how it’s done:

II. Downloading Required Files

1. Download Stock Recovery and save it to your desktop.

Stock Recovery (Download link’s available in the first post)

2. Download Oppo Tools APK and save it to your desktop.

Oppo Tools APK (Download link’s given in the first post)

III. Flashing Back the Stock Recovery on the Oppo R7 Lite

1. Rename the recovery image you have downloaded to recovery.img by right-clicking on it and selecting Rename.

2. Connect your device to your PC using a USB cable.

3. Copy recovery.img from your desktop over to the internal SD card storage on your device.

4. When recovery’s copied, disconnect your device from your PC.

5. Head over to the Google Play store and download and install Flashify on your device.

6. Launch Flashify from the app drawer once it’s installed.

7. Tap on Recovery image under the Flash section in the app.

Photo Credit: oppomobile.vn

8. Select Choose a file on the screen that follows.

Photo Credit: oppomobile.vn

9. Choose recovery.img that you copied in the previous steps to be flashed on your device.

10. Wait for Flashify to flash the stock recovery on your device.

11. When Flashify’s done flashing recovery, reboot your device.

Your Oppo R7 Lite is now back to the stock recovery, and here’s how you can unroot it now:

IV. Unrooting the Oppo R7 Lite

1. Plug in your device to your PC using a USB cable.

2. Copy Oppo Tools APK from your desktop over to the internal SD card storage on your device.

3. When the APK’s copied, unplug your device from your PC.

4. Head to Menu > Settings > Security and turn on Unknown sources.

5. Open File Manager and tap on Oppo Tools APK to install the app on your device.

6. When the app’s installed, open it from your app drawer.

7. Tap on the Common tab in the app.

8. Tap on the Un Root button in the app.

Photo Credit: oppomobile.vn

9. Wait for it to unroot the device.

10. When it’s done unrooting, reboot your device.

Your Oppo R7 Lite should now be unrooted.

How To Update Sprint Galaxy S3 To Android 4.4.2 Kitkat

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Sprint Samsung Galaxy S3.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin V3.09 (V3.09 download link given in last of that page)
• Official Stock Firmware / Mirror

How To Update Android 4.4.2 Kitkat On Sprint Samsung Galaxy S3 :

1. Download both Odin & Firmware Package in your PC.
2. Extract both Odin & Firmware Package in your PC.
3. Now Turn off your device completely.
4. Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
5. Now launch the Odin .exe file and connect your device to PC with USB cable.
6. Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
7. Now select files as per below instructions to install Android 4.4.2.Kitkat on Sprint Samsung Galaxy S3.
8. If only one file is available in the Stock Firmware zip package of .tar.md5 extension. Then click on PDA button in Odin and select file that file. If there are other file also in zip file then select files according to given below, otherwise move to the next step:

• Click on Phone button in Odin and select file with "MODEM" in its name
• Click on CSC button in Odinand select file with "CSC" in its name
• Click on PIT button in Odin and select file with ".pit" in its name

1. Only check Auto Reboot & F.Reset  option, don’t tick any other option.
2. Now click on Start button in Odin to start the installation process.It take few minutes to finish.
3. You will see a PASS message in Odin message box after successful installation.
4. Your device reboot automatically.First boot can take few minutes.

Great!! Sprint Samsung Galaxy S3 is successfully updated to Android 4.4.2. kitkat. If you want to get Root Access back Click Here

Source

How To Flash Stock Firmware And Unroot Samsung Galaxy S5 (All Variants)

In this article you'll find out How To Flash Stock Firmware And Unroot Samsung Galaxy S5 [All Variants] with easiest method and step by step instructions. Samsung Galaxy S5 is the most popular smartphone from Samsung till now. Samsung reported that 10 million units shipped of Samsung Galaxy S5 in just 25 days after launch. In our last few article we wrote about How To Root Samsung Galaxy S5 in different variants and carriers. If you are facing any type of lag or error after rooting your device then you can easily Unroot your device with this method.

Some Important Links For Samsung Galaxy S5:

• How To Root T-Mobile Samsung Galaxy S5 G900T
• How To Root Samsung Galaxy S5 G900H Easy Method
• How To Install CWM Custom Recovery In Samsung Galaxy S5
• How To Root Samsung Galaxy S5 SM-G900F On Android 4.4.2 Kitkat
• How To Root Sprint Samsung Galaxy S5 SM-G900P
• How To Root Canadian Samsung Galaxy S5 SM-G900W8
• How To Root US Cellular Samsung Galaxy S5 SM-G900R4
• How To Root MetroPCS Samsung Galaxy S5 SM-G900T1
• How To Root Vodafone Samsung Galaxy S5 SM-G900M

Before You Begin:

• Make sure that your device is charged more than 60%.
• This method is only for Samsung Galaxy S5. Don't try this method on any other device.
• Backup all your important data first.
• Download & Install Samsung Galaxy S5 USB Drivers in your PC.
• Enable USB Debugging in your device. Click Here if you don't know How To Enable USB Debugging.
• Exit/Disable Samsung Kies and Antivirus in your PC.

Download Required Files:

• Odin3  V3.09

Download & extract latest stock firmware for your device in your PC.

• International Galaxy S5 (Exynos) – SM-G900H
• International Galaxy S5 (LTE) – SM-G900F
• Asian Galaxy S5 – SM-G900I
• Canadian Galaxy S5 – SM-G900W8
• At&t Galaxy S5 – SM-G900A
• T-Mobile Galaxy S5 – SM-G900T
• Sprint Galaxy S5 – SM-G900P
• US Cellular Galaxy S5 – SM-G900R4
• VodaFone Samsung Galaxy S5 – SM-G900M
• Verizon Samsung Galaxy S5 – SM-G900V
• MetroPCS Samsung Galaxy S5 – SM-G900T1

How To Flash Stock Firmware And Unroot Samsung Galaxy S5:

• Download and extract Odin3 V3.09 in your PC.
• Open Odin3 folder and run Odin3.exe file in your PC.
• In boot your device in Download Mode. To do so, turn off your device completely and wait for 10 seconds. Now press and hold Volume Down + Home Button + Power Key simultaneously and turn your device ON (If you see any warning message, Press Volume Up to continue).
• Now connect your device to PC with USB cable.
• The ID:COM Box will turn blue after detecting your device (Make sure USB Drivers are installed successfully).
• Now select AP tab in Odin and select file with .tar.md5 format extracted from Stock Firmware zip file.
• Tick Auto Reboot & Factory Reset options in Odin and don't tick any other option.
• After all this, Click at Start on Odin and it will start flashing stock firmware in your device.
• After successful flashing of stock firmware, your device will reboot automatically.
• Disconnect your device from PC.

That's it, Your Samsung Galaxy S5 is successfully unrooted and running on stock firmware now.
Source

How To Update Samsung Galaxy S3 With Android 4.3 Jellybean

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Samsung Galaxy S3 I9300.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin
• Official Stock Firmware

How To Update Android 4.3 On Samsung Galaxy S3 I9300:

• Download both Odin & Firmware Package in your PC.
• Extract both Odin & Firmware Package in your PC.
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
• Now select files as per below instructions to install Android 4.3 jellybean on Samsung Galaxy S3

• Click on PDA button in Odin and select file with “CODE” in its name
• Click on Phone button in Odin and select file with “MODEM” in its name
• Click on CSC button in Odinand select file with “CSC” in its name
• Click on PIT button in Odin and select file with “.pit” in its name

• Only check Auto Reboot & F.Reset  option, don’t tick any other option.
• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.First boot can take few minutes.

If you want to root your Samsung Galaxy S3 on Android 4.3 jellybean follow the method given here

How To Update LG Nexus 4 With Android 4.4 Kitkat

Before You Begin:

• You need a windows based PC or Laptop.
• Make sure your device is charged minimum 70%.
• Enable USB Debugging in your device.Click Here if you don't know how to enable.
• The device bootloader must be unlocked.Click Here if bootloader is not unlocked.
• Don't forgot to make a backup of your data.

Download Required Files:

• Android SDK (For Installation & Setup Help Click Here)
• Android 4.4 kitkat update

How To Update Android 4.4 in Nexus:

• Connect your nexus device to your computer.
• Navigate to C:\Program Files\Android SDK\sdk\platform-tools on your computer.
• Now copy the extracted files (from update package,Copy the extracted files not the extracted folder) to the path mentioned above (C:\Program Files\Android SDK\sdk\platform-tools).
• Now hold Shift Key on the keyboard and give Mouse Right Click (keep hold Shift Key) to appear pop-up menu and select Open command window here (from the pop-up menu).As shown in picture...

• A command window will appear.Type adb reboot bootloader in command window and hit enter button.
• Once you are in bootloader mode.Close the command window.
• Now run the flash-all.bat file to start the update process.(from C:\Program Files\Android SDK\sdk\platform-tools)
• Now wait for the process to complete.
• Once the process is completed,your device will reboot automatically.
• Please be patience,first boot can take 4-5 minutes.

Congrats!!! your Nexus Device is updated with the latest Android 4.4 Kitkat...

Nexus 5 Multi-tool – Root, Unlock & Install TWRP Recovery

Before You Begin:

• You need a Windows Based PC or Laptop.
• This method is tested on Nexus 5 with Android 4.4 Kitkat  only.
• Enable USB Debugging in your device.Click Here if you don’t know how to enable.
• Charge your device 70% minimum.
• Make a backup of your device’s data for safety.

Download Required Files:

• Nexus 5 Multi ToolKit

How To Use This Tool:

• Download & Extract Nexus 5 Multi Tool on your desktop PC.
• Now connect your device to PC with USB Cable.
• Open the Nexus 5 Multi Tool extracted folder and run Tool.bat file.

• Now all you have to make the selection, type the number on the tool kit to perform the action on your device. To root, Unlock Bootloader and Install TWRP recovery, type “1″ and hit the Enter key.
• Now just follow the onscreen instructions and you will have a Nexus 5 with root access with TWRP recovery.

How To Root and Unroot Motorola Droid X Easiest Method

How To Root or Unroot Motorola Droid X

Before Your Begin:

1. Charge your device upto 70% level.
2. Make a backup of data for safety.
3. Enable USB Debugging in your device.Click Here if you don't know how to enable.

Download Required Files:

1. Framaroot.apk Android App

How To Root Motorola Droid X:

1. Download Framaroot.apk app in you device.
2. Install Framaroot.apk app in your device.(If you see an error, Go to Setting>Applications and enable Unknown Sources their and then try to install again).
3. Launch framaroot app in your device.
4. Now you will see some exploits in app.
5. Select GANDALF Exploit from them.
6. Application will automatically start rooting your device.
7. It will take only few seconds and then restart your device.
8. Your Motorola Droid X is successfully rooted now...

How To Unroot Motorola Droid X:

1. Download Framaroot.apk app in you device.
2. Install Framaroot.apk app in your device.(If you see an error, Go to Setting>Applications and enable Unknown Sources their and then try to install again).
3. Launch framaroot app in your device.
4. Select Unroot from option.
5. Then select GANDALF Exploit from the list of exploits.
6. The Application will automatically Unroot your device.
7. It take few seconds only then restart your device.
8. Motorola Droid X is unrooted now...

Thanks for visiting....Don't forgot to share & follow us on Social media..

How To Root , Unroot , Install Custom Recovery in LG Google Nexus 4 Easiest Method

How To Root/Unroot/Install Custom Recovery in LG Google Nexus 4 Running On Android 4.2.2 Jellybean

You May Also Like:

How To Unlock Bootloader Of All Nexus Devices : Click Here

How To Update Android 4.3 On LG Nexus 4 : Click Here

How To Root & Install Custom Recovery In LG Nexus 4 Running On Android 4.3 : Click Here

Before You Begin:

• You need a Windows Based PC or Laptop.
• This method is tested on Nexus 4 only.
• This method is working on device with unlocked bootloader : Click Here For Unlocking
• Enable USB Debugging in your device.Click Here if you don't know how to enable.
• Charge your device 70% minimum.
• Make a backup of your device's data for safety.

Download Required Files:

• Nexus 4 Toolkit

How To Root Nexus 4:

• Please follow all the instructions given above.
• Download the Nexus 4 Toolkit in your computer.
• Install Nexus 4 toolkit in your PC.
• During installation it will ask you which Nexus 4 you are using.
• Select the device and hit enter for next step.
• Type 1 and hit enter to install the drivers.
• Now connect your device to PC with USB cable.
• Now you see some options in Nexus 4 Toolkit.
• Select Root option for Root access,Unroot Option or Install Recovery option.Whatever you want..
• Now it asks you to boot your device in fastboot mode.Turn off your device and then turn it on again with pressing & holding Volume Up+Volume Down+Power Button at same time until it turn on.
• Unplug your device and then plug it again.It will start installing fastboot drivers.
• After drivers installation follow the on screen instructions.
• If fastboot drivers didn't install.Download Drivers Here and install them manually.

How To Unroot LG Optimus G Pro AT&T (E980) (Easy Method)

You think you device not running  well because it is rooted.You want to unroot your device because you are facing lags and error So , EditAndroid.Com provide you the easiest method of unrooting... Please note that this method is only for rooted device in case you already installed custom recovery or custom rom this method not for you.We will also provide a solution for this in next couple of days... Here is the simplest way to unroot your LG Optimus G Pro with SuperSu app from chainfire If you are using any other root app you should replace it first

Unrooting Of LG Optimus G Pro :

1. Factory reset, this is necessary if you want to revert the settings back to their factory defaults (Settings -> General tab -> Backup and reset), please keep in mind it will permanently erase all your data stored on the internal storage, so make sure you’ve a  backup of it. (Optional)
2. Now launch SuperSu app from your App Drawer.
3. Goto Setting of SuperSu app and scroll down.
4. Look for Full Unroot option their.
5. An alert message will show up just tap on continue for Unrooting.

Wait some time & your device will Reboot automatically , After booting up try to verify with Root checker app Your LG Optimus G Pro is unrooted now..

How To Root or Unroot Xolo Q700

Xolo Q700 is a dual-SIM phone packed with Android v4.2 (Jelly Bean) OS, quad core 1.2GHz processor, and 1GB RAM. The phone has 5MP back camera with LED flash & VGA front camera. For connectivity, it has Bluetooth, Wi-Fi, 3G, and USB. Its 2400 mAh battery gives 33 hrs music playback, 10 hrs video playback, 17 hrs 2G talk time, 16 hrs 3G talk time, 16 days 2G standby time, and 15 days 3G standby time. Other features include GTalk, dedicated Kids Mode with parental controls, and 4GB internal storage.Q700 is very popular in Indian Smartphone market.

Today we will show you how to root or unroot Xolo Q700 : By EditAndroid

1. Before You Begin:

1. This method is tested on Xolo Q700 only (Please don’t try on other devices)
2. You need a Windows based PC or Laptop.
3. Enable USB Debugging in your device.Follow this method if you don’t know how to enable.
4. Download & Install Xolo Q700 USB Drivers in your PC.
5. You device must charged 50% minimum.

2. Download Required Files:

1. Auto Root Tool

3. Rooting/Unrooting Of Xolo Q700:

1. Please follow all the instructions given above for safe rooting.
2. After Installing USB Drivers connect your device with PC and let him complete his driver installation.
3. Download & Extract the Auto Root Tool zip file in a folder of your PC.
4. After extracting you see a RunMe.bat file in folder.
5. Now double click on RunMe.bat and launch it.
6. A CMD Window open in your PC with some options.
7. You will see “Please Enter A Valid Number (1 to x)”.
8. Type 1 and press enter for start rooting,Your device reboot during the process.
9. Your device automatically restart and you will find a SuperSu app in App Drawer.
10. Congrats!!! you are successful in rooting.
11. If you want to unroot your device follow the method same as for rooting,But when you click on RunMe.bat and some options appear on CMD window Type x for unroot and hit enter.

So this is the method of Rooting & Unrooting of Xolo Q700….If you face any problem feel free to contact me by comment below or On our FB Page

How To Root or Unroot Xolo Q600

Xolo Q600 with 1.2 GHz Quad Core CPU PowerVR SGX processor with awesome features. This new model have 512 MB of RAM for nice speed and 1.2 Quad Core Processor technology allows multiple programs to run simultaneously on the processor so Run multiple apps without slowing down. Power VR SGX544 Graphics Processor for batter 2D and 3D view. q600 is with 4GB internal memory and the Jelly Bean v4.2 Operating System and 4.5 inches display with TFT 5 finger touch display. Finally this model is very high performance mobile and provide a high speed browsing on internet. For the security matter this phone is on good position because of its in-built XOLO Secure | Anti -theft app. One more special in built application feature for the speed typing Type Fast | Swype Faster app.

Today we will show you how to root or unroot Xolo Q600 : By EditAndroid

1. Before You Begin:

1. This method is tested on Xolo Q600 only (Please don’t try on other devices)
2. You need a Windows based PC or Laptop.
3. Enable USB Debugging in your device.Follow this method if you don’t know how to enable.
4. Download & Install Xolo Q600 USB Drivers in your PC.
5. You device must charged 50% minimum.

2. Download Required Files:

1. Auto Root Tool

3. Rooting/Unrooting Of Xolo Q600:

1. Please follow all the instructions given above for safe rooting.
2. After Installing USB Drivers connect your device with PC and let him complete his driver installation.
3. Download & Extract the Auto Root Tool zip file in a folder of your PC.
4. After extracting you see a RunMe.bat file in folder.
5. Now double click on RunMe.bat and launch it.
6. A CMD Window open in your PC with some options.
7. You will see “Please Enter A Valid Number (1 to x)”.
8. Type 1 and press enter for start rooting,Your device reboot during the process.
9. Your device automatically restart and you will find a SuperSu app in App Drawer.
10. Congrats!!! you are successful in rooting.
11. If you want to unroot your device follow the method same as for rooting,But when you click on RunMe.bat and some options appear on CMD window Type x for unroot and hit enter.

So this is the method of Rooting & Unrooting of Xolo Q600….If you face any problem feel free to contact me by comment below or On our FB Page

How To Root & Unroot Celkon A119Q Signature HD

Celkon's Signature HD A119Q unveils the best smartphone features ever. Live the moment with the vibrant 5" HD screen. Powered by a 2100mAh battery and the latest Android OS, A119Q's 1.2 GHz Quad Core processor gives you the ultimate gaming experience. The smartphone's Quad Core processor helps you to multi-task easily without compromising on clarity. Flaunt the sleek design and discover every detail with the 720*1280 Pixels screen resolution. It's time to say goodbye to boring multimedia features. Capturing great photos is just a click away. The incredible 12 MP camera with auto-focus and smart LED flashlight helps you treasure every expression. The 3 MP front camera is definitely the icing on the cake. The more the better! Contacts, E-mails, messages, music files, pictures, videos, name it and you have it with you all along. The A119Q will always have the space to store your important and valuable stuff with its 4GB internal and 32GB expandable memory.

Today we will show you how to root or unroot Celkon A119Q Singnature HD : By EditAndroid

1. Before You Begin:

1. This method is tested on Celkon A119Q only (Please don’t try on other devices)
2. You need a Windows based PC or Laptop.
3. Enable USB Debugging in your device.Follow this method if you don’t know how to enable.
4. Download & Install Celkon A119Q USB Drivers in your PC.
5. You device must charged 50% minimum.

2. Download Required Files:

1. Auto Root Tool

3. Rooting/Unrooting Of Celkon A119Q:

1. Please follow all the instructions given above for safe rooting.
2. After Installing USB Drivers connect your device with PC and let him complete his driver installation.
3. Download & Extract the Auto Root Tool zip file in a folder of your PC.
4. After extracting you see a RunMe.bat file in folder.
5. Now double click on RunMe.bat and launch it.
6. A CMD Window open in your PC with some options.
7. You will see “Please Enter A Valid Number (1 to x)”.
8. Type 1 and press enter for start rooting,Your device reboot during the process.
9. Your device automatically restart and you will find a SuperSu app in App Drawer.
10. Congrats!!! you are successful in rooting.
11. If you want to unroot your device follow the method same as for rooting,But when you click on RunMe.bat and some options appear on CMD window Type x for unroot and hit enter.

So this is the method of Rooting & Unrooting of Celkon A119Q….If you face any problem feel free to contact me by comment below or On our FB Page