How to Root Verizon & AT&T Galaxy S4 on Android 4.3 Firmware

Image Credits

Kimu’s root exploit for the Verizon and AT&T Galaxy S4 is based on another exploit by Cubeuncube. The method is safe to use as its very name implies and works great on builds VRUEMJ7 and VRUEMK2 both.Though Saferoot method described below works fine on the Verizon S4 SCH-I545 and AT&T S4 SGH-I337, we cannot warrant that it is 100% safe. Follow the guide at your own risk.

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Samsung Galaxy S4 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy S4 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy S4.

Before You Begin:

• Samsung Galaxy S4 AT&T & Verizon(Check it: On Settings>About Device)
• Windows-based computer or laptop
• Download Samsung Galaxy S4 USB driver for Windows and install in your computer.
• Skip this step if you have installed the Samsung Kies.
• Enable USB Debugging on your device.Follow This Guide
• Make sure your phone is charged to 60% 80% to avoid battery blackout and interruption during this tutorial.
• We recommend you make a backup on your data and media files before the tutorial.

Download Required Files:

• SafeRoot.zip file: Download Link , Mirror 1 , Mirror 2

How To Root Samsung Galaxy S4 (AT&T & Verizon) on Android 4.3:

• Follow all step given above for safe rooting.
• Download & Extract Saferoot.zip file in your PC.
• Now connect your device to PC with USB cable (Make sure USB Debugging is enabled Follow This Guide).
• Now open the extract folder of Saferoot.zip file and double-click the install.bat file to run it.
• A command prompt window will launch. It will try to look for your device and when it is detected, the Saferoot script will run automatically and attempt to root your Verizon and AT&T Galaxy S4 on VRUEMJ7 or VRUEMK2 firmware.

• Wait for the completion of rooting process.
• When the SuperUser is installed to your phone, you device will reboot automatically.

How to S-OFF, Root and Install CWM/TWRP Recovery on HTC One Max

Image Credits

Key features

• Quad-band GSM/GPRS/EDGE support; 3G with HSPA; LTE
• 5.9" 16M-color 1080p Super LCD3 capacitive touchscreen with 373ppi pixel density
• Android OS v4.3 Jelly Bean with Sense UI 5.5
• Quad-core 1.7 GHz Krait 300 CPU, 2 GB RAM, Adreno 320 GPU; Qualcomm Snapdragon 600 chipset
• 4 MP autofocus "UltraPixel" camera with 1/3" sensor size, 2µm pixel size; LED flash
• 2.1 MP front-facing camera, 1080p video recording
• Wi-Fi a/b/g/n, Wi-Fi Direct and DLNA; Wireless TV-out (Miracast)
• 16GB/32GB of built-in storage, expandable via a microSD slot

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your HTC One Max Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your HTC One Max after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your HTC One Max.

Before You Begin:

• Visit HTC Dev, open an account there, click on the Unlock Bootloader icon on the page and unlock the bootloader of your HTC One Max by following the instructions given there. The users of Verizon One Max can download the Rumrunner Tool from below and achieve S-Off and root access.
• Enable USB Debugging in your device. Click Here if you don't know how to enable it.
• Download Android SDK and set it up in your PC. Click Here for full setup tutorial.
• Download & Extract ADB/Fastboot zip file in C drive of your PC.
• Download Rumrunner Tool for HTC Verizon model.
• Download unsecure kernel file for HTC One Max: Sprint_One_Max_1.16.651.4_Unsecure_kernel.Zip
• Download the following SuperUser file and copy it to your device: Superuser.Zip
• Now download your preferred custom recovery from below:
  • CWM Recovery:
    • HTC One Max (International): Recovery-Clockwork-Touch-6.0.4.5-T6ul.Img
    • HTC One Max (Sprint): Recovery-Clockwork-Touch-6.0.4.5-T6spr.Img
    • HTC One Max (Verizon): Recovery-Clockwork-Touch-6.0.4.5-T6vzw.Img
  • TWRP Recovery:
    • HTC One Max (International): Openrecovery-Twrp-2.6.3.0-T6ul.Img
    • HTC One Max (Sprint): Openrecovery-Twrp-2.6.3.0-T6spr.Img
    • HTC One Max (Verizon): Openrecovery-Twrp-2.6.3.0-T6vzw.Img

How To Root and Install CWM/TWRP Custom Recovery In HTC One Max:

1. Copy the SuperUser.zip file to your phone.
2. Download the CWM/TWRP recovery image file from above and copy it to “Android SDK Fastboot-ADB” folder. The location of the recovery file should be the same as fastboot and ADB files in the folder.
3. Connect your HTC One Max to computer via USB cable (do not use USB 3.0).
4. Now open a command prompt. To launch command box, press Shift key+Right-click on mouse and from the list of options, select “Open command window here”. Then type in the and issue the following command:

   adb devices

5. If you can see the serial number of your device in the command box, it’s is properly connected.
6. Now issue the following line to reboot your device in Bootloader mode:

   adb reboot bootloader

7. When you enter the Bootloader/HBOOT mode, highlight FASTBOOT by pressing volume down key and select it using the power button:
8. Now open the “Android SDK Fastboot-ADB” folder. Make sure you have already copied the recovery .img file here.
9. Launch a cmd window from within this folder (press Shift+Right-click on mouse) and type the command“fastboot flash recovery” followed by the name of the recovery image. For example, if you have downloaded the TWRP recovery image for the Verizon variant, type the following command line in the cmd window (you can replace the recover file name in Red with your own):

   fastboot flash recovery openrecovery-twrp-2.6.3.0-t6vzw.img

10. Now hit the Enter key:
11. Your favorite custom recovery will be installed to your HTC One Max within moments.
12. Finally, go to REBOOT BOOTLOADER option and select it.
13. Scroll to RECOVERY option and select it. You should now be taken to CWM or TWRP recovery interface.
14. Now open “install zip from sdcard” (CWM) or “Install” (TWRP) option depending on your recovery.
15. Navigate to the SuperUser.zip file and select it.
16. Confirm the installation when prompted and let it be installed.
17. When SuperUser is flashed, go to REBOOT option and select it.

How to Update Nexus 4 to Android 4.4.1 KOT49E KitKat OTA Official Firmware

Image Credits

Before You Begin:

• Backup device storage, SMS, contacts, calenders and other stuff (This procedure won’t wipe any of your present data on the phone, but we prefer to be at a safe side, always)
• If your device is running on Jellybean update to Android 4.4 Kitkat from Here
• Enable USB Debugging in your Nexus 4. Read guide here how to enable USB Debugging in Android devices.
• Make sure your Nexus 4 is charged al least 60%.
• Download & Install Latest Nexus 4 drivers in your PC.

Download Required Files:

• Android 4.4.1 Kitkat Update For Nexus 4

How To Update Nexus 5:

• Please follow all steps given above before you begin to next steps.
• Download the Nexus 4 Android 4.4.1 update file in your PC or Device and rename the update file to update.zip.
• Now connect your phone to the PC with USB cable and move the rename zip file update.zip to your SD card. Make sure the file is in the root folder.
• Now turn off your device and boot it in Bootloader mode.To do this Press and hold the Volume Up + Volume Down + Power buttons till you see the Fastboot menu.
• Follow the navigation instructions on the screen. Press Volume Up button several times till you see RECOVERY and press Power button to select it. You will get an exclamation mark now. Again hold your Volume Up + Power buttons. You should now see the Recovery Mode menu.
• Now you are in Recovery mode. From the recovery menu click on the update from sd card option. Now select the update.zip file confirm selection with Power button and install Android 4.4.1 update in your device.
• After completion of update, your device will reboot automatically or select reboot system now from recovery menu.
• First boot will take more time. Be patient ...

How to Update Asus Nexus 7 to Android 4.4.1 KOT49E KitKat OTA Official Firmware

Image Credits

Before You Begin:

• Backup device storage, SMS, contacts, calenders and other stuff (This procedure won’t wipe any of your present data on the phone, but we prefer to be at a safe side, always)
• Enable USB Debugging in your Nexus 7. Read guide here how to enable USB Debugging in Android devices.
• Make sure your Nexus 7 is charged al least 60%.
• Download & Install Latest Nexus 7 drivers in your PC.

Download Required Files:

• Android 4.4.1 Kitkat Update For Nexus 7

How To Update Nexus 7:

• Please follow all steps given above before you begin to next steps.
• Download the Nexus 7 Android 4.4.1 update file in your PC or Device and rename the update file to update.zip.
• Now connect your phone to the PC with USB cable and move the rename zip file update.zip to your SD card. Make sure the file is in the root folder.
• Now turn off your device and boot it in Bootloader mode.To do this Press and hold the Volume Up + Volume Down + Power buttons till you see the Fastboot menu.
• Follow the navigation instructions on the screen. Press Volume Up button several times till you see RECOVERY and press Power button to select it. You will get an exclamation mark now. Again hold your Volume Up + Power buttons. You should now see the Recovery Mode menu.
• Now you are in Recovery mode. From the recovery menu click on the update from sd card option. Now select the update.zip file confirm selection with Power button and install Android 4.4.1 update in your device.
• After completion of update, your device will reboot automatically or select reboot system now from recovery menu.
• First boot will take more time. Be patient ...

How To Root LG Nexus 5 on Android 4.4.1 KOT49E KitKat CF-Auto-Root Method

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Nexus 5 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Nexus 5 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Nexus 5.

Before You Begin:

• You need a Windows Based PC or Laptop.
• This method is tested on Nexus 5 with Android 4.4.1 Kitkat  only.Update to Android 4.4.1 from here.
• Download Nexus 5 USB Drivers from Here
• Enable USB Debugging in your device.Click Here if you don’t know how to enable.
• Charge your device 70% minimum.
• Make a backup of your device’s data for safety.

Download Required Files:

• CF Autoroot For Nexus 5  (Thanks to Chainfire)

How To Root Nexus 5:

• Download & Extract CF-Auto-Root.zip into a folder in computer.
• Turn Off your device completely .
• Boot up your device into Bootloader Mode by press and hold the Volume Up, Volume Down and Power button until Fastboot menu appear.
• Connect your device to computer.You should see Windows to install USB driver,complete  the installation process before proceed.
• Open the CF-Autoroot extracted folder and launch root-windows.bat file (For WINDOWS PC).
• Read and understand the instructions. First is to unlock bootloader (optional if you have unlockedbootloader) and follow by root.
• Press any key to continue.
• Check on both computer and device screen.
• You should see a red Android logo during rooting. Wait device to reboot.

Congratss…. your Nexus 5 is rooted now  IF you want to install custom recovery Click Here

How to Update Nexus 5 to Android 4.4.1 KOT49E KitKat OTA Official Firmware

Image Credits

Before You Begin:

• Backup device storage, SMS, contacts, calenders and other stuff (This procedure won’t wipe any of your present data on the phone, but we prefer to be at a safe side, always)
• Enable USB Debugging in your Nexus 5. Read guide here how to enable USB Debugging in Android devices.
• Make sure your Nexus 5 is charged al least 60%.
• Download & Install Latest Nexus 5 drivers in your PC.

Download Required Files:

• Android 4.4.1 Kitkat Update For Nexus 5

How To Update Nexus 5:

• Please follow all steps given above before you begin to next steps.
• Download the Nexus 5 Android 4.4.1 update file in your PC or Device and rename the update file to update.zip.
• Now connect your phone to the PC with USB cable and move the rename zip file update.zip to your SD card. Make sure the file is in the root folder.
• Now turn off your device and boot it in Bootloader mode.To do this Press and hold the Volume Up + Volume Down + Power buttons till you see the Fastboot menu.
• Follow the navigation instructions on the screen. Press Volume Up button several times till you see RECOVERY and press Power button to select it. You will get an exclamation mark now. Again hold your Volume Up + Power buttons. You should now see the Recovery Mode menu.
• Now you are in Recovery mode. From the recovery menu click on the update from sd card option. Now select the update.zip file confirm selection with Power button and install Android 4.4.1 update in your device.
• After completion of update, your device will reboot automatically or select reboot system now from recovery menu.
• First boot will take more time. Be patient ...

Congrats!!! Your device is successfully updated.If you want to Root & Install Custom Recovery after update Click Here.

If you want to Root your device with easy method Click Here.

How To Root And Install CWM Custom Recovery On Nexus 5 Android 4.4.1.

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Nexus 5 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Nexus 5 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Nexus 5.

Before You Begin: [If you want to Root Nexus 5 with CF-AutoRoot Easy Method Click Here]

• Backup device storage, SMS, contacts, calenders and other stuff (This procedure won’t wipe any of your present data on the phone, but we prefer to be at a safe side, always)
• This method is working for Nexus 5 with Android 4.4.1 only
• First Unlock the bootloader of your phone, Read our guide here how to Unlock Nexus 5 Bootloader
• Enable USB Debugging in your Nexus 5. Read guide here how to enable USB Debugging in Android devices.
• Make sure your Nexus 5 is charged al least 60%.
• Download & Install Latest Nexus 5 drivers in your PC.

Download Required Files:

• Download & Install Android SDK in your windows PC
• Download SuperSU v1.80 for Nexus 5
• Download CWM Custom Recovery v6.0.4.4.1.

How To Root & Install Recovery In Google Nexus 5 On Android 4.4.1:

• Please follow all the steps given above.
• Connect your device to PC with USB Cable and move SuperSU v1.80 zip file in SD card.
• Copy CWM Custom Recovery .img file in C://fastboot folder (Read Download & Install Android SDK in your windows PC article first).
• Turn off you phone and boot it in Bootloader mode. To do this Press Volume Down + Power keys for a few seconds till you see some text on the screen. This is Bootloader Mode.
• Now go to C://Fastboot directory on your PC and open Command Prompt (Shift + Right-click > Open Command Prompt).
• A Command Prompt will appear on your PC screen.

[highlight ]Type in the following command and press Enter.

fastboot flash recovery hammerhead-cwm-6.0.4.4.1-unofficial.img[/highlight]

• Wait for a minute, After completion of process CWM Recovery is successfully installed in your device.
• Now select Recovery Mode from the Bootloader Mode.
• Now your phone is on ClockworkMod recovery, scroll down to “flash zip from SD card” and press the power button to select it.
• Use volume keys, navigate to UPDATE-SuperSU-v1.80.zip and select it using the Power button.
• After completion for installation, Go back to main menu of recovery and select reboot system now.

How To Root Motorola Moto G With Superboot (Easy Method)

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Motorola Moto G Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Motorola Moto G after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Motorola Moto G.

Before You Begin:

• Create a backup of all your device’s data.
• Before you root, you need your bootloader to be unlocked, you can do so directly and easily via the Motorola Website.
• Enable USB debugging mode in your device. Click Here if you don’t know how to enable.
• Make sure that your device is charged at least 70% for safe installation.
• Download & Install Motorola Moto G USB Drivers in your PC. Connect your device to PC with USB and complete the driver installation.
• Download and Setup Android SDK in your PC. Click Here for Instructions

Download Required Files:

• Download Superboot

How To Root Motorola Moto G:

• Download & Extract Superboot zip file (r2-motog-superboot.zip) in a folder.
• Power Off your device and boot your device in bootloader mode. Press volume down and power button altogether to boot your Moto G into bootloader mode.
• Now connect your device to PC with USB cable.
• Run superboot-windows.bat as Administrator from the extracted Superboot folder.
• For MAC Users , Open a terminal window to the directory containing the files, and type the following commands:

[alert type=white ]chmod +x superboot-mac.sh[/alert]

[alert type=white ]sudo ./superboot-mac.sh[/alert]

• For Linux Users , Open a terminal window to the directory containing the files, and type the following commands:

[alert type=white ]chmod +x superboot-linux.sh[/alert]

[alert type=white ]sudo ./superboot-linux.sh[/alert]

• After the completion of process, reboot your device normally.

How to Root and Install TWRP Custom Recovery on Oppo N1

Image Credits

We’re going to guide to to attain root permissions on your N1 and Install TWRP custom recovery on it. Which in turn will enable you to use Root requiring apps, tweaks, custom ROMs and much more.

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Oppo N1 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Oppo N1 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Oppo N1.

Before You Begin:

• Create a backup of all your device’s data.
• Enable USB debugging mode in your device. Click Here if you don’t know how to enable.
• Make sure that your device is charged at least 70% for safe installation.
• Download and Insall Android SDK in your PC :Click Here
• Fastboot binary (Place in <android-sdk-directory>/tools): Click Here
• Enable Unknown Resources under Settings > Security.

Download Required Files:

• Download Latest TWRP Recovery : Click Here
• Download the Root exploit (Oppown-build3.apk): Click Here

How To Install TWRP Recovery In Oppo N1:

• Follow all step given in Before You Begin section and download files from Download section.
• Now connect your device to PC via USB cable.
• Go to the directory where the recovery image file is download, press the SHIFT key and right click on an empty space, select open command prompt here.
• Type the following command to reboot your device to fastboot mode

[alert type=white ]adb reboot bootloader[/alert]

• Flash the recovery using the following command. Make sure to replace x.x.x.x with the version label of your downloaded recovery image.

[alert type=white ]fastboot flash recovery openrecovery-twrp-x.x.x.x-N1.img[/alert]

• Now, Reboot your device. You can boot your device with following command.

[alert type=white ]adb reboot recovery[/alert]

TWRP custom recovery is successfully flashed in your Oppo N1.

How To Root Oppo N1:

• Download Root exploit from the Download Required Files section.
• Connect your device to PC via USB cable and transfer Apk file in your device or Download directly in your device.
• Install the Oppown-build3.apk app in your Oppo N1.
• Run the App from the app drawer and wait for ~1 minute.
• Now, open the Google Play Store and Install SuperSU by Chainfire
• Once SuperSU has been installed, connect your device to the PC, open a command prompt window and type the following command:

[alert type=white ]adb uninstall com.qualcomm.privinit[/alert]

• You can now reboot your device.

Congrats!!! your Oppo N1 is successfully rooted now... :)

How To Install (Update) Android 4.4 Kitkat In T-Mobile Samsung Galaxy S4

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your T-Mobile Samsung Galaxy S4 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your T-Mobile Samsung Galaxy S4 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your T-Mobile Samsung Galaxy S4.

Some Important Articles:

• How To Root T-Mobile Galaxy S4 M919 on Android 4.2.2 Jelly Bean [CF Auto Root]
• How To Install Clockworkmod Recovery on T-Mobile Galaxy S4 SGH-M919 (CWM)
• Top 5 Best Custom Roms For Samsung Galaxy S4 T-Mobile (SGH-M919)

Before You Begin:

• You need a Windows based PC or Laptop.
• This custom ROM is tested & working in T-Mobile Galaxy S4 only.
• Root & Install Custom Recovery in your T-Mobile Samsung Galaxy S4.(Links are given in Some Important Articles section above)
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your T-Mobile Samsung Galaxy S4.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• KangROM Android 4.4 For Galaxy S4

How To Update T-Mobile Samsung Galaxy S4:

• Follow all the instruction given above for safe installation.
• Now connect you device to PC with USB cable.
• Move or Copy both downloaded files on your external sdcard.
• Now switch off your device and boot into recovery mode.To do this, Press and Hold Volume Up + Home and Power buttons.
• Once you’re in Recovery Mode, Select wipe data/factory reset, followed by wipe cache and wipe dalvik cache from advanced.
• Now go back to the main menu of Recovery Mode and select “install zip from SD card”.
• Select and Install custom rom zip file and then GApps package.
• After successful installation, go back to main menu of Recovery Mode and select reboot system now.
• First boot can take upto 5 minutes.

How To Install (Update) Android 4.4 Kitkat In Samsung Galaxy S3 I9305 LTE

Image Credits

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Samsung Galaxy S3 LTE Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy S3 LTE after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy S3 LTE.

Some Important Articles:

• How To Root and Install Custom Recovery In Samsung Galaxy S3 (All Versions)
• 5 Best (Top) Custom Roms For Samsung Galaxy S3 I9300
• How To Update Samsung Galaxy S3 With Android 4.3 Jellybean
• How To Root Samsung Galaxy S3 I9300 On Android 4.3 Jellybean
• How To Install Android 4.4 Kitkat In Samsung Galaxy S3 I9300

Before You Begin:

• You need a Windows based PC or Laptop.
• Root & Install Custom Recovery in your Samsung Galaxy S3 LTE.(Links are given in Some Important Articles section above)
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3 LTE.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Android 4.4 Kitkat Custom ROM for Samsung Galaxy S3 LTE
• GApps Package For Samsung Galaxy S3

How To Update Samsung Galaxy S3:

• Follow all the instruction given above for safe installation.
• Now connect you device to PC with USB cable.
• Move or Copy both downloaded files on your external sdcard.
• Now switch off your device and boot into recovery mode.To do this, Press and Hold Volume Up + Home and Power buttons.
• Once you’re in Recovery Mode, Select wipe data/factory reset, followed by wipe cache and wipe dalvik cache from advanced.
• Now go back to the main menu of Recovery Mode and select “install zip from SD card”.
• Select and Install custom rom zip file and then GApps package.
• After successful installation, go back to main menu of Recovery Mode and select reboot system now.
• First boot can take upto 5 minutes.

How To Install (Update) Android 4.4 Kitkat In Samsung Galaxy S3 I9300

Warnings:

Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Samsung Galaxy S3 Android Smartphone:

• Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy S3 after Rooting/Installing it.
• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
• You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy S3.

Some Important Articles:

• How To Root and Install Custom Recovery In Samsung Galaxy S3 (All Versions)
• 5 Best (Top) Custom Roms For Samsung Galaxy S3 I9300
• How To Update Samsung Galaxy S3 With Android 4.3 Jellybean
• How To Root Samsung Galaxy S3 I9300 On Android 4.3 Jellybean

Before You Begin:

• You need a Windows based PC or Laptop.
• Root & Install Custom Recovery in your Samsung Galaxy S3.(Links are given in Some Important Articles section above)
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Android 4.4 Kitkat Custom ROM for Samsung Galaxy S3
• GApps Package For Samsung Galaxy S3

How To Update Samsung Galaxy S3:

• Follow all the instruction given above for safe installation.
• Now connect you device to PC with USB cable.
• Move or Copy both downloaded files on your external sdcard.
• Now switch off your device and boot into recovery mode.To do this, Press and Hold Volume Up + Home and Power buttons.
• Once you're in Recovery Mode, Select wipe data/factory reset, followed by wipe cache and wipe dalvik cache from advanced.
• Now go back to the main menu of Recovery Mode and select “install zip from SD card”.
• Select and Install custom rom zip file and then GApps package.
• After successful installation, go back to main menu of Recovery Mode and select reboot system now.
• First boot can take upto 5 minutes.

How To Root Samsung Galaxy Win I8550

If you are searching for Rooting guide,then you are at right place. In this article,I will provide you step by step instruction about "How To Root Samsung Galaxy Win Easily".

Warnings:

Below are some warning statements that you must be knowing before preparing to root your Samsung Galaxy Win Android Smartphone:

• Rooting is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy Win after rooting it.
• There are certain risks of damaging your Android Smartphone while rooting it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the rooting process.
• You might not receive any future official software or firmware updates after rooting your Samsung Galaxy Win.

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working on Samsung Galaxy Win.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Root File

How To Root Samsung Galaxy Win I8550:

• Please follow all the steps given above for your device safety.
• Download the OneClickRoot in your PC.
• Connect your device to PC with USB cable (Make use USB Debugging is enabled).
• Now run the OneClickRoot in your PC.
• Wait for few seconds, Let him detect your device.
• After OneClickRoot detect your device, Click on Root Now button.
• Rooting process will begin now, wait for process to end.
• Your Samsung Galaxy Win will reboot now.

How To Install (Update) Android 4.4 Kitkat In Samsung Galaxy Note 2

If you want to update your device with the official Android 4.3 jellybean Click Here

Before You Begin:

• Your device must be rooted. Click Here for rooting method for Note 2.
• You must have custom recovery in Note 2.Click Here for installation method.
• Download & Install Samsung Galaxy Note 2 USB Drivers in your PC.
• Enable USB Debugging in you device.Click Here if you don't know how to enable.

Download Required Files:

• Android 4.4 Custom Rom
• GApps For Note 2

How To Install Android 4.4 In Samsung Galaxy Note 2:

• Please follow all the instructions given in Before You Begin section.
• Download both Custom Rom & GApps package in your PC.
• Now connect your device to PC and transfer Custom Rom & GApps package to external Sdcard of your device.
• Now turn off your device.
• Boot your device in Recovery Mode (Press & Hold Volume Up+Home Button+Power Button)..Install CWM recovery first.
• Now wipe your device.Select Wipe data/Factory Reset & Wipe Cache Partition from Recovery Menu.
• Now go to advanced section of recovery and Wipe Dalvik Cache.
• Return to the main menu of Recovery Mode and select install zip from sdcard and select the download custom rom from the external sdcard.
• After successful installation of Custom Rom.Select install zip from sdcard and select the GApps Package and install it in your device.
• After successful installation.go back to main menu of Recovery Mode.
• Select reboot system now option from recovery.Your device will reboot automatically.
• First boot can take 5 minutes.So, don't worry about that

How To Update Samsung Galaxy S4 with Android 4.3 Jellybean

Android 4.3 New Features & Improvements For Samsung Galaxy S4:

• TRIM Support (Makes the device much faster)
• ANT+ Support
• Samsung KNOX Implementation (KNOX bootloader and dedicated application)
• Samsung Wallet comes pre-loaded
• Improved RAM management
• Improved Display colour reproduction (Display looks much sharper than before)
• Improved TouchWiz Launcher (Much less launcher redraws and less lag)
• New Samsung Keyboard
• New Samsung Browser (Full screen by default, new tab interface and more)
• New Reading Mode (Optimises display for reading, used by only a few specific applications)
• New Camera firmware
• Minor UI tweaks (Contacts app, Flashlight Widget, dialog boxes etc)

All Samsung Galaxy S4 I9500 users should have received the update notification. You can directly update the phone using OTA or using the computer with the Samsung Kies. If you have rooted the device or modified it anyway then both of the update processes will not work. You have to manually update Samsung Galaxy S4 I9500 to Android 4.3 stock ROM.

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Samsung Galaxy S4.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy S4.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin
• Official Stock Firmware

How To Update Android 4.3 On Samsung Galaxy S4:

• Download both Odin & Firmware Package in your PC.
• Extract both Odin & Firmware Package in your PC.
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
• Now select files as per below instructions to install Android 4.3 jellybean on Samsung Galaxy S4.

• Click on PDA button in Odin and select file with “CODE” in its name
• Click on Phone button in Odin and select file with “MODEM” in its name
• Click on CSC button in Odinand select file with “CSC” in its name
• Click on PIT button in Odin and select file with “.pit” in its name

• Only check Auto Reboot & F.Reset  option, don’t tick any other option.
• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.First boot can take few minutes.

How To Root LG G Pad 8.3 V500 Easy Method

Before You Begin:

• This method is tested & working on LG G Pad 8.3 only.
• Make sure that your device is charged at least 60%.
• Enable USB Debugging  in your device.Click Here if you don't know how to enable it.
• Backup all your data & files for safety.
• You must need a windows based PC or Laptop for this method.

Download Required Files:

• Download LG G Pad Drivers
• LG G Pad Root Kit

How To Root LG G Pad 8.3:

• Download & Install LG G Pad Drivers & Root Kit on your PC.
• Now connect your device to PC with USB cable (Make sure USB Debugging is enabled).
• Kingo Root Kit will detect your device.
• Now follow the simple on screen instructions.

Here we done your LG G Pad is successfully rooted now :).Open the App Drawer and you will find SuperSu app in it.