How To Root and Install CWM Recovery In Nvidia Shield Tablet

Source: nvidia.co.uk

Before You Begin:

1. This method works for Nvidia Shield Tablet Only. Don’t try on other devices.
2. Make sure that Unknown sources are enable in your device. If not go to Settings > Security > Device Administration > Unknown Source  (tick to enable it) .
3. Your device must be charged 50% minimum.
4. We recommend you to make a backup of your data.

Download Required File:

• TowelRoot Application (tr.apk)

How To Root Your Device:

• Download and Install TowelRoot application (tr.apk) in your Nvidia Shield Tablet.
• After installation, You'll find TowelRoot application in your App Drawer.

 

• Now tap on TowelRoot application to launch it in your Nvidia Shield Tablet.

 

 

• Once the TowelRoot application opened in your device, you'll see the following screen in your tablet.

 

 

• You'll see a option named "make it ra1n" in TowelRoot application, Tap on it to root your tablet.

 

• After rooting process you'll see the following successful message in your device.

 

 

• Go back to App Drawer and you'll find a new app named SuperSU in your Nvidia Shield Tablet like the one below. If SuperSU app don't show install it from Google Playstore.

 

That's it!! Your Nvidia Shield Tablet successfully  rooted now without any computer with TowelRoot application.

How To Flash CWM Recovery In Nvidia Shield Tablet:

• Download the unofficial CWM for your device: cwm-recovery-nvidia-shield-tab.img
• Copy this img file in your device or download directly in your device.
• Download Flashify app from Google Playstore (Click Here for direct link).
• Now install Flashify app and launch it in your device.
• Select CWM img file in app and flash it.

That's it!!

This Screenshots are not from Nividia Tablet but both are same

How to Unroot the Samsung Galaxy Tab 4 10.1 (LTE)

I. Before You Begin

1. You should’ve rooted your device using the procedure given here.

2. This only works for the SM-T535 model of the device.

3. This should only work on Windows based PCs.

4. You should’ve appropriate drivers installed on your PC. If you haven’t, download and install the latest drivers from here.

II. Downloading Required Files

1. Download Odin and save it to your desktop.

Odin

2. Download the appropriate stock firmware for your device and save it to your desktop.

Stock Firmware

III. Unrooting the Samsung Galaxy Tab 4 10.1 (LTE)

1. Extract files from Odin as well as Stock Firmware to your desktop by right-clicking on each of them and selecting Extract here.

2. Double-click on Odin executable and it’ll open.

3. Click on PDA and choose the stock firmware file you just extracted to your desktop.

4. Uncheck Repartition if it’s already checked in the Odin.

5. Put a checkmark in the boxes that say Auto Reboot and F. Reset Time.

6. Turn OFF your device.

7. Turn it back on by holding down Volume DOWN, Home, and Power buttons together.

8. Press Volume UP and your device should be in Download mode.

9. Plug in your device to your PC using the USB cable.

10. Click on Start in the Odin and it’ll start flashing the stock firmware on your device.

11. When the firmware’s flashed, your device should automatically reboot.

12. And you’re all set!

Your Samsung Galaxy Tab 4 10.1 (LTE variant) is now running the official stock firmware and is now unrooted.

How to Root the Samsung Galaxy Camera 2

I. Before You Begin

1. This will void the warranty of your device. We won’t be held responsible if you end-up bricking or damaging your device. Do it at your own risk.

2. This only works for the EK-GC200 model of the device.

3. This should only work on Windows based PCs.

4. You should’ve appropriate drivers installed on your PC. If you haven’t, you can download and install the latest drivers fromhere.

II. Downloading Required Files

1. Download Odin and save it to your desktop.

Odin

2. Download CF-Root and save it to your desktop.

CF-Root

III. Rooting the Samsung Galaxy Camera 2

1. Extract files from Odin and CF-Root to your desktop by right-clicking on each of them and selecting Extract here.

2. Double-click on Odin executable and it’ll launch.

3. Click on PDA and choose the CF-Root file that you just extracted to your desktop.

4. Make sure Repartition is unchecked in the Odin.

5. Checkmark the boxes that say Auto Reboot and F. Reset Time.

6. Turn OFF your device.

7. Turn it back on by holding down Volume DOWN, Home, and Power buttons together.

8. Press Volume UP and you should be in Download mode.

9. Plug in your device to your PC via USB cable.

10. Hit Start in the Odin and it’ll start flashing the root file on your device.

11. When the file’s flashed, your device should automatically reboot.

12. And you’re all set!

Congrats! Your Galaxy Camera 2 is now rooted. With root on your Android device, you can do a lot of things and the first thing we’d suggest you to do is install some root-only apps from the Google Play store. Go ahead and do it right now!

How to Root/Install CWM Custom Recovery the Samsung Galaxy Tab 3 Lite 7.0

 I.  Before You Begin

1. Rooting your device may void your warranty or damage your device. Proceed at your own risk.

2.  Charge your device to 75% or more and back up everything you feel is important before you start.

3.  Make sure you have the necessary drivers installed before you start.  Installing Samsung Kies usually takes care of this.

II.  Necessary Downloads

1.  Odin_v3.07.zip

2.  T110.CWM.v6.0.4.8.tar.md5 [Download link available in this post under the  CWM Recovery 6.0.4.8 section at the beginning of the post]

3.  android-armeabi-universal-root-signed.zip [File attached to this post]

III.  Installing Custom Recovery on the Galaxy Tab 3 Lite 7.0

1.  Enable USB debugging on your device by going to Settings > Developer options.  If you do not find Developer options on your device,  go to Settings > About phone and keep tapping on the build number until you see the message ‘You are now a developer.’

2.  Connect your device to your PC and copy android-armeabi-universal-root-signed.zip to your device’s SD card (internal or external); copy it to the main folder, not into any subfolders.

3.  Disconnect your device and power it down.

4.  Boot your device into Download mode.  To do this, press and hold the Volume Down + Home + Power buttons simultaneously for five seconds or so until you see the warning screen, then press the Volume Up button.

5.  Extract Odin_v3.07.zip to a folder on your desktop.

6.  From the extracted folder, double-click on Odin3 v3.07.exe to run the Odin tool.

7.  On Odin, uncheck the Auto Reboot tickbox and make sure that only F. Reset Time is ticked under the Option section.  This is important as ticking anything else here could end up bricking your device.

8.  Connect your device (now in Download mode) to your PC using a compatible microUSB cable.  The ID:COM field should now show the message ‘ADDED!’ which means your device is recognized and ready for flashing.  If not, reinstall drivers and try again.

9.  Click on the PDA button on Odin and navigate to the location of T110.CWM.v6.0.4.8.tar.md5, select it and then click Open to load it on to Odin.

10.  Click on Start to starting flashing the ClockworkMod Recovery file.

11.  Wait until you see the RES OK! message and then reboot your device directly into the custom recovery using the Volume Up + Home + Power buttons simultaneously; let go of the Power button when you see the Samsung logo but continue holding the Volume Up and Home buttons until you get into recovery.

You now have ClockworkMod Recovery installed on your device!

IV.  Rooting the Samsung Galaxy Tab 3 Lite 7.0

1.  Once in recovery, use the volume buttons to highlight ‘install zip from sdcard’ and use the home button to execute the option.

2.  Navigate to the location of the android-armeabi-universal-root-signed.zip file you copied to your SD card above and highlight and select it.

3.  Select Yes on the next screen.

4.  Once flashed, go back to the main menu and select ‘reboot system now.’

Your Samsung Galaxy Tab 3 Lite 7.0 is now rooted!

How to Root the Samsung Galaxy Note 10.1 (XXUDNE6)

How to Root the Moto G 4G/LTE Easy Method

Learn How to Root the Moto G 4G/LTE with easy method and step by step instructions.

I. Before You Begin

1.  Rooting your device may void your warranty or damage your device.  Proceed at your own risk.

2.  Charge your device to 75% or more before you begin to prevent unwanted shutdowns.

3.  Back up everything you feel is important before you start, just in case.

4.  You will need a Moto G 4G with an unlocked bootloader for this procedure to work.  Keep in mind that unlocking your bootloader may void your warranty (and will definitely delete your data), so decide if you really want to be rooted before you proceed.

5.  Make sure that the necessary drivers are installed before you begin.

II.  Necessary Downloads

1.  UPDATE-SuperSU-v2.01.zip (or latest version available)

2.  openrecovery-twrp-2.7.1.1-xt1032.img (file attached to this post)

3.  adb-fastboot.zip

III.  Rooting the Moto G 4G/LTE

1. Connect your device to your PC and copy the UPDATE-SuperSU-v2.01.zip file you downloaded above to your device’s internal SD card (copy it to the main folder of the SD card; do not put it into any subfolders).  Disconnect your device.

2.  Rename openrecovery-twrp-2.7.1.1-xt1032.img to recovery.img

3.  Extract adb-fastboot.zip to a folder on your desktop.  Copy recovery.img to this folder.

4.  Boot your device into fastboot mode.  To do this, with the device powered off, press and hold the Volume Down + Power buttons simultaneously until you are in fastboot mode.

5.  Connect your device to your PC using a compatible microUSB cable.  At this point, if there are any drivers being installed, let them do so before continuing.

6.  Hold the Shift key on your keyboard and right-click on any empty space in the adb-fastboot folder and click on ‘Open command window here’ to open up a command prompt window.

7.  Run the following command to verify that your device is connected and recognized properly (your device ID should show up as a string of alphanumeric characters).

fastboot devices

8.  Now run the following command to boot to TWRP Touch Recovery.

fastboot boot recovery.img

9.  Once the custom recovery is flashed and TWRP Recovery is loaded on your device, tap on the Install button.

10.  Navigate to the location of UPDATE-SuperSU-v2.01.zip and add it to the flash queue.

11.  Swipe the ‘Swipe to confirm flash’ button.

12.  Once flashed, go back to the main menu and tap on Reboot System.

That’s it!  Your Moto G 4G/LTE is now completely rooted!

How to Downgrade Your Samsung Galaxy Gear from Tizen to Android

Learn How to Downgrade Your Samsung Galaxy Gear from Tizen to Android with easy method and instructions.

I.  Before You Begin

1.  This procedure only applies to the original Samsung Galaxy Gear (SM-V700) running Tizen; do not try this on the Samsung Galaxy Gear 2.

2.  Make sure you have the necessary drivers installed for this procedure to work before you start.

II.  Necessary Downloads

1.  SM-V700_tizen_to_android.zip [Download link available in this post]

2.  Odin3_v3.09.zip

III.  Flashing Android to Samsung Galaxy Gear

1.  Extract SM-V700_tizen_to_android.zip to a folder on your desktop.

2.  Extract the Odin_v3.09.zip file you downloaded above to a folder on your desktop.

3.  From the extracted folder, double-click on Odin3 v3.09.exe to run the tool.

4.  Put your device into recovery mode.  To do this, with the device on, press and hold the power button until you see the message ‘rebooting.’  Now, press the power button a few times until you see a menu; use the Volume Up and Down buttons to select Download, then press and hold the Power button.

5.  Connect your device to your PC using a compatible USB cable.  The ID:COM field on Odin should now light up blue and you should see the “ADDED!” message to signify that your device is connected and recognized properly.  If not, reinstall drivers and try again.

5.  Click on AP button, locate 1_dn_android.tar from the extracted SM-V700_tizen_to_android folder and click on OK to load it on Odin.  Click on the PIT button, locate ls02_android.pit and click on OK to load it on to Odin.

5.  Make sure that the Re-Partition and Flash Lock are unchecked, and only Auto-Reboot is checked.  This is important as you might brick your device if these options are ticked!

6.  Click on Start.

7.  Once you see the message ‘PASS,’ let your device reboot.

IV.  Flashing Android Recovery

Follow the same steps as in Section III, but use the 2_recovery.img.tar file this time.  Let your device reboot once done.

You have now successfully downgraded your Samsung Galaxy Gear to Android!

How To Root And Install TWRP Recovery In Galaxy Note 3 Neo

Source: ThinkDigit

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working and tested on Samsung Galaxy Note 3 Neo only.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy Note 3 Neo.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Download Odin3 v3.09 flash tool
• CF-Auto-Root zip file
• TWRP Recovery Image (openrecovery-twrp-2.7.0.0-hlltexx.img.tar)

How To Install TWRP Recovery In Samsung Galaxy Note 3 Neo:

• Download both Odin & TWRP Recovery Image zip files.
• Extract Odin flash tool on your desktop
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button at same time.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed). Click on PDA button in Odin and select the TWRP Rrecovery Image tar file (openrecovery-twrp-2.7.0.0-hlltexx.img.tar). Only check Auto Reboot & F.Reset  option, don’t tick any other option like given below.

• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.

That's it!! Custom Recovery is successfully installed in your device. If you want to boot into Recovery Mode, Power Off your device, Press and hold Volume Up + Home Button + Power Button at same time until you see Recovery Mode.

How To Root Samsung Galaxy Note 3 Neo:

• The method of installing TWRP Recovery and Rooting Note 3 Neo is almost same.
• Download and extract Odin zip file on desktop.
• Download and extract CF-Autoroot zip file on same folder where Odin is extracted in previous step.
• Now turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button at same time.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed). Click on PDA button in Odin and select theCF-Auto Root Image tar file (CF-Auto-Root-hllte-hlltexx-smn7505.tar.md5). Only check Auto Reboot & F.Reset  option, don’t tick any other option like given below.
• 
• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.

Congrats! Your Samsung Galaxy Note 3 Neo is successfully rooted now and have TWRP Custom Recovery installed.

Source

How To Update Android 4.4.2 Kitkat On Samsung Galaxy Note 8.0

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Samsung Galaxy Note 8.0.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Samsung Galaxy Note 8.0.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin V3.09 (V3.09 download link given in last of that page)
• Official Stock Firmware / Mirror

How To Update Android 4.4.2 Kitkat On Samsung Galaxy Note 8.0:

1. Download both Odin & Firmware Package in your PC.
2. Extract both Odin & Firmware Package in your PC.
3. Now Turn off your device completely.
4. Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
5. Now launch the Odin .exe file and connect your device to PC with USB cable.
6. Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
7. Then click on PDA button in Odin and select the extracted file with .tar.md5 extension.

1. Only check Auto Reboot & F.Reset  option, don’t tick any other option.
2. Now click on Start button in Odin to start the installation process.It take few minutes to finish.
3. You will see a PASS message in Odin message box after successful installation.
4. Your device reboot automatically.First boot can take few minutes.

That's it!! Your Samsung Galaxy Note 8.0 GT-N5100 is successfully updated to Android 4.4.2 kitkat.

Source

How To Root Sprint Galaxy S3 After Android 4.4.2 Kitkat Update

Before You Begin:

• You need a Windows based PC or Laptop.
• You device must be updated to Android 4.4.2 kitkat.
• This method is working and tested on Sprint Galaxy S3 only.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Download Odin3 v3.07 flash tool  (Important For All)
• CF-Auto-Root zip file

How To Root Sprint Galaxy S3:

• Download both Odin & CF-Auto-Root zip files.
• Extract Odin flash tool on your desktop
• Now Turn off your device completely.
• Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button at same time.
• Now launch the Odin .exe file and connect your device to PC with USB cable.
• Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed). Click on PDA button in Odin and select the CF-Auto-Root tar file. Only check Auto Reboot & F.Reset  option, don’t tick any other option like given below.

• Now click on Start button in Odin to start the installation process.It take few minutes to finish.
• You will see a PASS message in Odin message box after successful installation.
• Your device reboot automatically.

Congrats!!! Your Sprint Galaxy S3 is rooted on Android 4.4.2 kitkat successfully.
Source

How To Update Sprint Galaxy S3 To Android 4.4.2 Kitkat

Before You Begin:

• You need a Windows based PC or Laptop.
• This stock rom is only for Sprint Samsung Galaxy S3.
• Download Samsung USB Drivers Here and connect your device with PC for complete the installation.
• Enable USB Debugging in your Sprint Samsung Galaxy S3.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• Odin V3.09 (V3.09 download link given in last of that page)
• Official Stock Firmware / Mirror

How To Update Android 4.4.2 Kitkat On Sprint Samsung Galaxy S3 :

1. Download both Odin & Firmware Package in your PC.
2. Extract both Odin & Firmware Package in your PC.
3. Now Turn off your device completely.
4. Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
5. Now launch the Odin .exe file and connect your device to PC with USB cable.
6. Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
7. Now select files as per below instructions to install Android 4.4.2.Kitkat on Sprint Samsung Galaxy S3.
8. If only one file is available in the Stock Firmware zip package of .tar.md5 extension. Then click on PDA button in Odin and select file that file. If there are other file also in zip file then select files according to given below, otherwise move to the next step:

• Click on Phone button in Odin and select file with "MODEM" in its name
• Click on CSC button in Odinand select file with "CSC" in its name
• Click on PIT button in Odin and select file with ".pit" in its name

1. Only check Auto Reboot & F.Reset  option, don’t tick any other option.
2. Now click on Start button in Odin to start the installation process.It take few minutes to finish.
3. You will see a PASS message in Odin message box after successful installation.
4. Your device reboot automatically.First boot can take few minutes.

Great!! Sprint Samsung Galaxy S3 is successfully updated to Android 4.4.2. kitkat. If you want to get Root Access back Click Here

Source

How To Root And Flash Custom Recovery In Motorola Moto E

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working and tested on Motorola Moto E with Unlocked Bootloader only. You can Unlock Bootloader from official site.
• Download and Install Moto E USB Drivers.
• Enable USB Debugging in your Motorola Moto E.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Required Files:

• msfastboot-v2
• Unofficial TWRP Recovery Image
• SuperSU zip file

How To Root And Flash Custom Recovery In Motorola Moto G:

• Follow all the steps given in Before You Begin section first.
• Download and Extract msfastboot-v2 zip file in a folder of your computer.
• Now download and move Unofficial TWRP Recovery image in the folder same folder of msfastboot-v2.
• Turn Off your device completely. Press and hold Volume Down + Power Button at same time for few seconds and it'll boot your device in Fastboot mode.
• Connect your device to PC with USB Cable (Make sure USB drivers are installed successfully).
• Now open the folder where msfastboot-v2 is extracted, Press SHIFT button + Mouse right click and select Open command window here.
• A command window will appear on your desktop, type fastboot flash recovery moto_e_twrp2.7.0.0_v1.2.img
• Flashing will take few seconds after flashing turn off your device again.
• Now boot your device again in Fastboot mode and press Volume Down to select Recovery and then Volume Up to boot into Recovery mode.
• Your device will go to Recovery Mode now, tap on Install  and select SuperSU zip file and flash it.
• After flashing SuperSU zip file, go to main menu of Recovery and select Reboot System option.

That's it! Your Moto E is successfully rooted now and have Custom Recovery installed.

Source: XDA Forums

How To Flash Stock Firmware And Unroot Samsung Galaxy S5 (All Variants)

In this article you'll find out How To Flash Stock Firmware And Unroot Samsung Galaxy S5 [All Variants] with easiest method and step by step instructions. Samsung Galaxy S5 is the most popular smartphone from Samsung till now. Samsung reported that 10 million units shipped of Samsung Galaxy S5 in just 25 days after launch. In our last few article we wrote about How To Root Samsung Galaxy S5 in different variants and carriers. If you are facing any type of lag or error after rooting your device then you can easily Unroot your device with this method.

Some Important Links For Samsung Galaxy S5:

• How To Root T-Mobile Samsung Galaxy S5 G900T
• How To Root Samsung Galaxy S5 G900H Easy Method
• How To Install CWM Custom Recovery In Samsung Galaxy S5
• How To Root Samsung Galaxy S5 SM-G900F On Android 4.4.2 Kitkat
• How To Root Sprint Samsung Galaxy S5 SM-G900P
• How To Root Canadian Samsung Galaxy S5 SM-G900W8
• How To Root US Cellular Samsung Galaxy S5 SM-G900R4
• How To Root MetroPCS Samsung Galaxy S5 SM-G900T1
• How To Root Vodafone Samsung Galaxy S5 SM-G900M

Before You Begin:

• Make sure that your device is charged more than 60%.
• This method is only for Samsung Galaxy S5. Don't try this method on any other device.
• Backup all your important data first.
• Download & Install Samsung Galaxy S5 USB Drivers in your PC.
• Enable USB Debugging in your device. Click Here if you don't know How To Enable USB Debugging.
• Exit/Disable Samsung Kies and Antivirus in your PC.

Download Required Files:

• Odin3  V3.09

Download & extract latest stock firmware for your device in your PC.

• International Galaxy S5 (Exynos) – SM-G900H
• International Galaxy S5 (LTE) – SM-G900F
• Asian Galaxy S5 – SM-G900I
• Canadian Galaxy S5 – SM-G900W8
• At&t Galaxy S5 – SM-G900A
• T-Mobile Galaxy S5 – SM-G900T
• Sprint Galaxy S5 – SM-G900P
• US Cellular Galaxy S5 – SM-G900R4
• VodaFone Samsung Galaxy S5 – SM-G900M
• Verizon Samsung Galaxy S5 – SM-G900V
• MetroPCS Samsung Galaxy S5 – SM-G900T1

How To Flash Stock Firmware And Unroot Samsung Galaxy S5:

• Download and extract Odin3 V3.09 in your PC.
• Open Odin3 folder and run Odin3.exe file in your PC.
• In boot your device in Download Mode. To do so, turn off your device completely and wait for 10 seconds. Now press and hold Volume Down + Home Button + Power Key simultaneously and turn your device ON (If you see any warning message, Press Volume Up to continue).
• Now connect your device to PC with USB cable.
• The ID:COM Box will turn blue after detecting your device (Make sure USB Drivers are installed successfully).
• Now select AP tab in Odin and select file with .tar.md5 format extracted from Stock Firmware zip file.
• Tick Auto Reboot & Factory Reset options in Odin and don't tick any other option.
• After all this, Click at Start on Odin and it will start flashing stock firmware in your device.
• After successful flashing of stock firmware, your device will reboot automatically.
• Disconnect your device from PC.

That's it, Your Samsung Galaxy S5 is successfully unrooted and running on stock firmware now.
Source

How To Root And Install TWRP Recovery On Oppo Find 7a

Before You Begin:

• You need a Windows based PC or Laptop.
• This method is working and tested on Oppo Find 7a only.
• Download and Install Oppo USB Drivers
• Enable USB Debugging in your Oppo Find 7.Click Here if you don’t know how to enable.
• Your device must be charged 50% minimum.
• Make backup of device data for safety.

Download Requried Files:

• Install Android SDK and Setup ADB
• Download DV.zip file
• TWRP Recovery Image (openrecovery-twrp-2.7.0.0-find7a.img)
• SuperSU zip file (UPDATE-SuperSU-v1.9.zip)

How To Install TWRP Custom Recovery On Oppo Find 7a:

• Follow all the steps given in Before You Begin and Download Section carefully.
• Download and extract DV.zip file on your desktop (You will find a DVfolder in zip file)
• Now move the download TWRP Recovery Image (openrecovery-twrp-2.7.0.0-find7a.img) to the DVfolder on desktop.
• Power Off your device completely. Now press and hold Volume Up and Power Button together until you see fastboot (bootloader) mode.
• Connect your device to PC with USB cable.
• Open the DVfolder on desktop. Press Right Click while holding SHIFT key on empty space inside folder. Right Click menu will appear. Select Open Command window here.
• A CMD window will open in your PC. Type the following command in CMD and hit Enter (This will flash TWRP Custom Recovery in your device).

  fastboot flash recovery openrecovery-twrp-2.7.0.0-find7a.img

• Flashing of Custom Recovery Image will take few second.
• Now type following command in CMD and hit Enter button again.

  fastboot reboot

This command will reboot your device in normal mode. That's it, Custom Recovery is successfully installed in your device. If you want to boot your device in Recovery Mode, Power Off your device, Now Press and Hold Volume Down and Power Button together until you see TWRP Recovery.

How To Root Oppo Find 7a:

• Download SuperSU zip file (UPDATE-SuperSU-v1.9.zip) from Download Section given above.
• Connect your device to PC and move SuperSU zip file (UPDATE-SuperSU-v1.9.zip) in your Oppo Find 7a.
• Disconnect your device from PC.
• Reboot your device in Recovery Mode. Press & Hold Volume Down + Power Button at the same time until you see  Recovery Mode.
• In Recovery Mode tap on Install and select the SuperSU zip file (UPDATE-SuperSU-v1.9.zip).
• Confirm your selection.
• Once the flashing of zip file successfully go back to main menu of  Recovery Mode and select reboot system now.

Congrats!! Your device is successfully rooted now..
Source

How To Root LG G Pro 2 Easiest Method

In this article we will show you How To Root LG G Pro 2 with the easiest method and step by step instructions. LG G Pro 2 is latest phablet from LG. LG G Pro 2 come with a massive 5.9-inch True IPS+ LCD capacitive touchscreen with full HD (1920 x 1080) screen resolution and Corning Gorilla Glass 3 protection for display. The device has a 13 MP rear camera with features like LED flash, Auto-focus, HDR and also support 4K video recording at 30fps and 1080p at 60fps. The device has also 2.1 MP front facing camera for video chat at 1080p resolution. LG G Pro 2 run on Android 4.4.2. Kitkat with support of 2.26 GHz Quad-core CPU, Qualcomm Snapdragon 800 chipset with Adreno 330 GPU for better performance. Pro 2 is available in 16 GB and 32 GB version with 3 GB RAM for excellent multi-tasking.

Supported New Firmware: Check in Settings>About Device

• LG G Pro 2 F350K
• LG G Pro 2 F350L
• LG G Pro 2 F350S

Before You Begin:

1. This method works for LG G Pro 2 Only. Don’t try in other devices.
2. Download & Install LG G Pro 2 USB Drivers from Here
3. Enable USB Debugging in your device.Click Here if you don’t know how to enable.
4. Your device must be charged 50% minimum.
5. We recommend you to make a backup of your data.

Download Required Files:

• Download ioRoot zip file

Root LG G Pro 2 :

• Download and extract ioroot.zip file on your PC.
• Connect your device to PC with USB cable.
• If you are a Windows user, right click on root-windows.bat file and Run as administrator option. Mac and Linux users can use the “root-mac.sh” and “root-linux.sh” respectively.
• A CMD window will appear on desktop asking you to press any key to continue .

• Press any key to start rooting process.
• When it is finished, your LG G2 will be rooted and reboot automatically.

Congrats!!! your LG G2 is successfully rooted now. You will find SuperSu app in App Drawer.
Source